8LSA46.S1060C200-0
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 8LSA46.S1060C200-0 is a synchronous servo motor with a rated speed of 6000 rpm and a rated torque of 2.0 Nm. Manufactured by B & R Automation as part of their 8LS Synchronous Motors series, it features a frame size of 46 with an approximate 100mm flange. This motor boasts IP65 protection and self-cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
8LSA46.S1060C200-0 is a servo motor with extra high output torque. It is part of the 8LS series from Kollmorgen. Speed rating of the three-phase motor is 6000 RPM. Windings on the motor have 10 poles. The rated torque is 5 Nm and the rated power output of the synchronous motor is 3.14 kilowatts. Rated current for the 8LSA46.S1060C200-0 motor is 6.14 Amps. Stall torque for the motor is 10 Nm and the stall current is 12.28 Amps. Maximum ratings for torque and current are 40 Nm and 53.07 Amps. Maximum speed of the AC motor is 12000 RPM. Its torque constant is 0.81 Nm/A and the voltage constant is 49.22 Volts/1000 RPM. Resistance of the motor stator is 0.48 Ohms and the inductance of the stator is 4.36 millihenry.
Electrical time constant of the Kollmorgen motor is 9.08 milliseconds. Its thermal time constant is 40 minutes. Weight of the only the motor is 8.1 kilograms. There is an optional holding brake, which adds to the total weight of the system. Weight of the brake is approximately 0.48 kilograms and its holding torque is 8 Nm. The brake’s moment of inertia is 0.54 kg cm2. The 8LSA46.S1060C200-0 motor works with a Kollmorgen ACOPOS servo drive. The manufacturer recommends using cables with 4 mm2 cross section with this motor. This is a self-cooled synchronous motor. Its protection rating is IP64. To improve ingress protection, operators can order an oil seal for their 8LS motors. Both smooth and keyed shafts are available, and this motor has a smooth shaft. Industrial motors must be installed in accordance with relevant local and regional electrical codes. Failure to follow important safety precautions can lead to severe injury.
Frequently Asked Questions about 8LSA46.S1060C200-0:
Q: What is the maximum motor speed?
A: The maximum motor speed is 12000 RPM.
Q: Is a holding brake installed on the motor?
A: A holding brake is installed on the motor.
Q: What is the shaft design?
A: The motor has a smooth shaft.
Q: How does the motor dissipated heat produced during operation?
A: This is a self-cooled motor.
Q: Which drive is compatible with the motor?
A: The ACOPOS 8V1180.00-x series is compatible with the motor.
