8LSA46.E3060D000-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA46.E3060D000-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series, featuring self-cooling with free air circulation. It has a flange dimension of 100 mm, a smooth shaft end, and operates at a rated speed of 6000 rpm with an angled connector for electrical connection. The motor does not include a holding brake or oil seal and is configured in the standard 8LSA format without reinforced bearings.
Internal Product Review
The 8LSA46.E3060D000-0 is a B & R Automation three-phase synchronous motor with self-cooling through free circulation. An angled swivel connector supports clean cable routing and efficient machine integration. Rated speed reaches 6000 rpm, making this motor an excellent choice for fast and precise motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA46.E3060D000-0 is an AC servo motor built by B & R Automation for the 8LS Synchronous Motors series. It is intended for closed-loop positioning and speed control in industrial automation, where rapid moves and high accuracy are required for pick-and-place heads, gantry axes, and feed drives. The model belongs to the 8LSA configuration line, which omits reinforced bearings to keep mass low and maintain inertia that is compatible with fast duty cycles.
At a rated shaft speed of 6000 rpm, the motor supports high cycle counts with minimal dwell time between moves. Heat is removed through a self-cooling housing that depends on free airflow, eliminating the need for external blowers or liquid circuits. Cabling exits through an angled connection that eases routing in compact cabinets and prevents sharp cable bends. Mechanical coupling is supported by a 100 mm flange, allowing direct attachment to compatible gearboxes or adapter plates. Internally, a three-phase synchronous winding set works with permanent magnets to deliver constant torque at commanded speeds within the servo loop.
The output uses a smooth shaft, allowing clamp couplings or shrink discs to be installed without keyway constraints. The motor attaches to the machine through its mounting flange, while length code 6 indicates the housing depth and active stack length for this model. The motor is supplied without a holding brake, so an external mechanical brake or drive-applied torque is necessary if the load must remain stationary. The standard configuration includes a pre-installed connector for power and feedback wiring, which simplifies cable attachment within the machine. The motor does not have an oil seal, making it suitable for dry or enclosed machine environments where protection against fluid at the shaft is not required.
