8LSA45.E3060D000-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA45.E3060D000-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series. It has a flange dimension of 100 mm, rated speed of 6000 rpm, and features a smooth shaft and mounting flange. The motor is self-cooled with free circulation and uses an angled connector for its connection hardware.
Internal Product Review
The 8LSA45.E3060D000-0 is a B & R Automation three-phase synchronous motor designed for precise servo duty. Self-cooling through free circulation and a 6000 rpm rated speed support efficient thermal behavior and strong dynamic performance. An angled swivel connector and smooth shaft make the unit a highly practical choice for clean machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA45.E3060D000-0 synchronous motor is produced by B&R Automation within the 8LS Synchronous Motors series. As an AC servo unit, it converts three-phase electrical power into precise rotary motion for positioning and speed-control tasks in automated equipment. The motor uses standard bearings rather than a reinforced bearing set, making it suitable for typical radial and axial loads within its operating range. Its length code 5 indicates the active stack length used for medium-torque applications in packaging machines, material-handling systems, and pick-and-place stations. A compatible servo drive regulates the supplied current according to feedback signals so the motor can maintain accurate motion as the mechanical load changes.
The motor reaches a rated speed of 6000 rpm, supporting fast indexing in applications with short cycle times. Heat is removed through self-cooling with free air circulation, so the installation does not require an external blower or liquid-cooling circuit. Power and feedback cables connect through an angled swivel connector, which can simplify cable routing when nearby machine components limit access. The square motor face measures 100 mm across, allowing accurate alignment with compatible gearboxes and machine plates. The unit has no holding brake, so vertical or gravity-loaded axes require drive-applied torque or an external brake to prevent movement while stationary. Adequate clearance around the housing allows natural airflow to carry heat away without obstructing surrounding components.
The motor uses a smooth shaft, allowing torque to be transmitted through a clamping hub or shrink disc without a keyed connection. Its three-phase synchronous design works with a compatible inverter to provide controlled torque, speed, and rotor position throughout the operating range. The front bearing has no oil seal, so the shaft area should not be exposed directly to pressurized coolant, lubricant spray, or other fluids that could enter the housing. Mechanical attachment is provided by a mounting flange, which supports rigid face mounting and helps maintain shaft alignment with the driven equipment. Couplings should be installed without excessive axial force, and connected components should be aligned carefully to avoid unnecessary bearing loads. The surrounding machine design should also protect the open shaft interface from contamination while preserving access to the swivel connector and mounting fasteners.
