8LSA44.EB060D200-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8LSA44.EB060D200-0 is a three-phase synchronous motor in the 8LS Synchronous Motors series, featuring a standard holding brake and flange mounting. It includes an inductive EnDat encoder with a 19/12 bit resolution and supports multi-turn capability of up to 4096 revolutions. The motor has a rated speed of 6000 rpm, supports self-cooling with free circulation, and has a flange dimension of 100 millimeters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA44.EB060D200-0 is a three-phase synchronous motor from B&R Automation’s 8LS Synchronous Motors series. The 8LSA designation indicates a standard build without reinforced bearings, making the motor suitable for general motion duties in industrial automation. Supplied with a smooth shaft and mounting flange, the unit can be coupled to gearboxes or belt-drive assemblies. It converts electrical energy from the servo inverter into precise rotary movement for packaging stations, pick-and-place heads, material-handling axes, and other automated machinery. The standard bearing arrangement is intended for applications in which axial and radial loads remain within the limits established for this motor family.
The motor reaches a maximum speed of 6000 rpm, enabling high surface velocities while remaining within its permitted thermal range. A 100 mm mounting flange centers the housing on the machine frame, while length code 4 indicates the motor’s stack depth and corresponding continuous torque capacity. Power and feedback cables exit through an angled swivel connector, which simplifies cable routing where installation space is limited. The stator uses self-cooling through free air circulation, so no external fan or liquid-cooling loop is required. Adequate clearance around the housing is still necessary to prevent heat from accumulating during operation. The motor does not include an oil seal, so it should be installed away from cutting fluids, lubricant spray, and direct coolant exposure.
Position feedback is provided by an inductive EnDat encoder that communicates through protocol version 2.1. The encoder supplies a resolution of 19/12 bits for single-turn and multi-turn position data, respectively. It tracks an absolute multi-turn range of 4,096 revolutions, allowing the drive to recover the recorded axis position after a loss of power. A standard holding brake locks the rotor when the axis is disabled or de-energized, helping prevent unintended movement while the motor is stopped. The keyed circular connection hardware supports secure attachment and quick cable assembly. Load-retention requirements should account for the brake’s intended holding function rather than treating it as a service brake for repeated dynamic stopping.
