8LSA44.EB030D200-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA44.EB030D200-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series featuring a 100 mm flange and a standard mounting flange. It comes with inductive EnDat encoder technology, supports multi-turn capability up to 4096 revolutions, and has a rated speed of 3000 rpm. The motor uses a self-cooling design with free circulation and is equipped with a standard holding brake.
Internal Product Review
The 8LSA44.EB030D200-0 is a B & R Automation three-phase synchronous motor with self-cooling for dependable continuous-duty operation. An inductive EnDat 2.1 encoder supports precise feedback and stable positioning in servo applications. A standard holding brake and 3000 rpm rated speed make the unit a strong choice for dynamic axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA44.EB030D200-0 is an AC servo motor produced by B & R Automation for the 8LS Synchronous Motors series. Installed inside a machine axis, it delivers closed-loop motion so that controllers can set position, speed, or torque without mechanical camming. This capability supports automated packaging platforms, gantry stages, and assembly stations that require precise electric motion.
The motor is a three-phase synchronous motor, so its three stator phases are evenly displaced electrically to produce steady rotor torque through electronic commutation. A nominal speed of 3000 rpm matches common drive modules, allowing direct coupling to gearboxes that accept high-speed inputs. Mounting is provided through a flange with a 100 mm square pattern, simplifying attachment to standardized machine frames. Thermal energy is removed by self-cooling airflow around the housing, so no external fan or liquid cooling loop is required. Power, feedback, and brake conductors exit through a swivel connector, which helps reduce cable stress when the motor is installed in a confined space. A factory-installed standard holding brake secures vertical loads whenever power is interrupted. The smooth shaft transmits torque to clamped hubs without requiring a keyway.
Position feedback is generated by an inductive EnDat sensor that uses protocol version 2.1, allowing the drive to read absolute rotor angles immediately after power-up. The measuring system provides 19/12-bit resolution for single-turn and multi-turn position data, supporting fine positioning increments and full-revolution tracking during coordinated motion sequences. Its internal gearing supports 4096 revolutions of battery-free multi-turn counting, so a homing routine is not required after a shutdown. The motor does not have an oil seal, which reduces friction at the bearing interface and can improve efficiency in low-torque applications.
