8LSA44.E2030D200-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA44.E2030D200-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series with a flange dimension of 100 mm and a rated speed of 3000 rpm. It features a standard holding brake, self-cooling with free circulation, and an angled connector for electrical connection. The motor has a smooth shaft and a mounting flange, with no reinforced bearing or oil seal.
Internal Product Review
The 8LSA44.E2030D200-0 is a three-phase synchronous motor with self-cooling free circulation. A standard holding brake and 3000 rpm rated speed make the unit a strong fit for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA44.E2030D200-0 is a synchronous servo motor produced by B&R Automation as part of the 8LS Synchronous Motors series. With its compact frame and electronic commutation, the unit supplies torque for positioning tables, gantries, and packaging machinery that rely on repeatable speed tracking. As a motion element, it converts drive inverter output into mechanical rotation, allowing direct coupling to loads that demand high accuracy. Its design supports controlled acceleration and precise positioning when paired with a compatible servo drive and feedback system.
The motor is a three-phase synchronous machine, so its rotor field locks to the stator excitation and maintains a constant electrical angle under varying loads. It reaches a nominal speed of 3000 rpm, enabling fast cycle times in servo axes without exceeding the intended bearing speed. Thermal management relies on self-cooling with free air circulation, which allows ambient air to pass over the housing fins and remove heat without an external blower. A square 100 mm flange provides the mounting interface and helps maintain alignment with compatible gearheads and machine plates. Power and feedback conductors exit through an angled swivel connector arrangement, which reduces cable strain and supports flexible routing in confined installations.
For holding functions, a standard holding brake grips the shaft when the drive is de-energized, preventing vertical loads from drifting. The stator housing includes a rigid mounting flange, allowing installation on a suitable machine plate without additional mounting brackets. Output torque is delivered through a smooth shaft, which is suitable for clamping couplings and other keyless connections. The motor has no oil seal, so it should be protected from direct lubricant exposure or installed with suitable external sealing where contamination is possible. Length code 4 indicates the motor’s axial configuration, while the standard 8LSA configuration does not include a reinforced bearing. This bearing arrangement helps keep the motor’s mass and rotational inertia moderate for dynamic positioning applications.
