8LSA44.DA060S000-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8LSA44.DA060S000-3 is a three-phase synchronous motor from the 8LS Synchronous Motors series, featuring a 100 mm flange dimension and rated for 6000 rpm. This unit uses an inductive EnDat 2.2 encoder, supports a single-cable hybrid connection, and has self-cooling with free air circulation. It comes with a smooth shaft, a mounting flange, and does not include a holding brake or oil seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA44.DA060S000-3 belongs to the 8LS Synchronous Motors series produced by B & R Automation. This three-phase synchronous motor serves as a compact rotary actuator for positioning and velocity control tasks in automated machinery. It can be coupled directly to gearboxes or load shafts in applications that require accurate motion and responsive acceleration. The standard 8LSA design does not include a reinforced bearing set, which keeps the motor’s mass and rotational inertia low for dynamic operation.
The motor reaches a rated speed of 6000 rpm, allowing fast cycle times when paired with a compatible inverter. Its 100 mm flange provides the mounting interface for attachment to a matching machine plate without an adapter. Rotor position is monitored by an inductive EnDat feedback system that resists contamination and electromagnetic interference. The encoder supports EnDat protocol version 2.2, enabling high-resolution digital communication with compatible B & R drive controllers. Its absolute position word has a resolution of 19/0 bits for single-turn and multi-turn data, respectively, providing 19-bit position feedback within one revolution and no multi-turn tracking. Length code 4 indicates the active stack depth selected to balance continuous torque capacity and heat dissipation during operation.
Heat is removed through a self-cooling housing that relies on ambient air circulation, eliminating the need for an external blower. Power, signal, and safety conductors use a single-cable solution, reducing cabinet wiring and limiting the area of electromagnetic loops. The rotor has a smooth shaft that supports connection to friction clutches or shrink-fit hubs. The motor is supplied without a holding brake, so the drive or an external mechanical device must retain any static load when power is removed. No oil seal is installed, making the motor more suitable for clean installations where the shaft interface is not exposed to lubricants or liquid contaminants. The mounting flange has threaded holes for standard fasteners, and product revision 3 identifies the applicable design revision for this model.
