8LSA37.DB060S000-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8LSA37.DB060S000-3 is a three-phase synchronous motor from the 8LS Synchronous Motors series with a rated speed of 6000 rpm and a flange dimension of 91.3 mm. It features a single-cable hybrid connection, self-cooling design, and an inductive EnDat encoder with a resolution of 19 bits single-turn and 12 bits multi-turn. This motor uses a mounting flange and comes with a smooth shaft but does not include a holding brake or oil seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA37.DB060S000-3 is a three-phase synchronous servo motor produced by B&R Automation within the 8LS Synchronous Motors series. Designed for high-speed axis duties in packaging, assembly, and material-handling equipment, the unit supplies controlled torque and position feedback to drive systems in industrial automation. A smooth shaft end permits direct coupling to gearboxes or load pulleys, and the motor’s compact flange profile simplifies mechanical integration into machines with limited mounting depth.
The motor reaches a rated speed of 6000 rpm, allowing fast indexing cycles without exceeding thermal limits. Heat produced during operation is removed through self-cooling, which relies on free air circulation around the housing, so no external fan or liquid circuit is required. Electrical power and digital feedback share one hybrid line through the single-cable solution, which reduces cabinet wiring and potential grounding loops. Rotor position and multi-turn count are captured by the inductive EnDat sensor system running on version 2.2, delivering absolute position data with resistance to magnetic stray fields. Mechanical attachment uses a 91.3 mm square flange, ensuring compatibility with compact servo gear stages.
The encoder offers a resolution of 19/12 bits for single-turn and multi-turn tracking, and it continues counting through up to 4096 revolutions without power to support precise homing routines after shutdowns. The motor has a standard bearing configuration without reinforcement, so axial loads must remain within the normal limits for the series. The motor has no internal brake, so an external device must hold the axis when motion stops. A shaft seal is not included, so the motor must be installed outside splash zones or paired with external protective bellows. A keyed connector terminates the hybrid cable and secures the electrical connection. The mounting flange layout, length code 7, and smooth shaft support alignment within compact automation frames.
