Product Description:

The 8LSA36.R0030D000-0 is a three-phase synchronous motor produced by B&R Automation for use in the 8LS Synchronous Motors series. As a drive element, it delivers rotational motion to automated axes and maintains torque consistency within closed-loop control systems on packaging, printing, and material-handling equipment. Its synchronous design supports accurate coordination with a compatible servo drive during indexing, speed changes, and repeated motion cycles. This allows the motor to serve in applications where stable rotary response is needed across changing load conditions.

This unit uses the 8LSA designation and has a standard configuration without a reinforced bearing, which suits applications with moderate axial loads. A mounting flange with a diameter of 91.3 mm provides the mechanical interface, while a single industrial connector handles both power and feedback. Position feedback is generated by a resolver, allowing analog angle information to be sent to the drive controller even in electrically noisy environments. Heat is removed through self-cooling with free circulation, so natural convection dissipates winding heat without added fan hardware. At rated operation, the rotor reaches 3000 rpm, which matches the speed class commonly used for mid-size servo axes in general automation.

Power and signal conductors exit the stator through an angled swivel connector orientation, which eases cable routing inside compact cabinets. Motion repeatability is held within 10 arcmin, helping the control loop maintain accurate positioning with minimal backlash compensation. The motor has a smooth shaft, which eliminates keyway stress points when clamp-style couplings are used. Applications that rely on passive holding torque require an external brake because no internal brake is fitted. An oil seal is also not present. The motor has length code 6, which corresponds to the selected stack length. The flange pattern allows direct bolting without additional adapter plates.