8LSA36.EB060D200-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA36.EB060D200-3 is a three-phase synchronous motor from the 8LS Synchronous Motors series. It features a standard holding brake, smooth shaft, and a mounting flange, with a rated speed of 6000 rpm. The motor uses inductive EnDat encoder technology with multi-turn capability up to 4096 revolutions and resolutions of 19 and 12 bits for single and multi-turn, respectively.
Internal Product Review
The 8LSA36.EB060D200-3 is a three-phase synchronous motor from B & R Automation with self-cooling by free circulation. Inductive EnDat feedback and multi-turn capability support accurate positioning in demanding motion applications. A standard holding brake adds dependable stopping control, and the 6000 rpm rating is a strong advantage for dynamic axis performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA36.EB060D200-3 is a three-phase synchronous servo motor produced by B & R Automation within the 8LS Synchronous Motors series. It serves as a compact drive element that converts electrical energy into controlled rotary motion for positioning tasks in automated machinery, robotics, and packaging equipment. The motor belongs to the 8LSA configuration line, indicating a standard build without reinforced bearings.
During operation, the rotor can sustain a rated velocity of 6000 rpm, permitting high-speed cycles without step-up gearing. Heat is removed by a self-cooling system that uses free air circulation, so no external fan or liquid loop is required. Position feedback comes from an inductive EnDat sensor that provides digital communication with compatible drives while resisting contamination. The feedback interface complies with version 2.1 of the EnDat protocol. The unit is supplied with a standard holding brake, enabling static torque retention whenever power is removed. Length code 6 identifies the active stack depth available for producing torque within the motor housing. Product revision 3 reflects the model revision produced by the manufacturer. Because there is no oil seal, the smooth shaft end offers low friction, but the installation must remain free of lubricant spray and other fluids that could reach the bearing area.
A flange pitch circle of 91.3 mm aligns the motor with the corresponding machine mounting pattern, and the housing is secured by the mounting flange. The angled swivel connector keeps the cable bundle within the machine envelope and allows its direction to be adjusted for the available routing space. The EnDat sensor delivers a combined 19/12-bit resolution for precise position feedback to the drive. Its absolute encoder retains position information across power cycles through a multi-turn counter spanning 4096 revolutions, reducing the need to perform a new reference movement after startup.
