8LSA36.E3022D100-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA36.E3022D100-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series. It has a rated speed of 2200 rpm and features a self-cooling design with free air circulation. The motor comes with a 91.3 mm flange, a key shaft end, and an angled connector for mounting.
Internal Product Review
The 8LSA36.E3022D100-0 is a B & R Automation three-phase synchronous motor with self-cooling, free-circulation operation. An angled swivel connection and keyed shaft support clean installation and reliable mechanical engagement. A 2200 rpm rated speed is a strong advantage for responsive motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA36.E3022D100-0 is a rotary servo motor built by B&R Automation for the 8LS Synchronous Motors series. It drives machine axes in industrial automation and delivers repeatable torque, speed, and position control when paired with a compatible inverter. The motor can operate positioning tables, conveyors, packaging equipment, and other machinery that requires controlled rotary motion. Its compact housing supports direct attachment to a machine frame without separate foot mounts.
This model is a three-phase synchronous motor that produces smooth torque across its operating range. The rotor reaches a rated speed of 2200 rpm, supporting medium-duty positioning and constant-velocity tasks. Heat is removed through self-cooling with free air circulation, so the motor does not require an external fan or liquid cooling circuit when sufficient ambient airflow is available. An angled swivel connector housing allows the plug direction to be rotated to accommodate enclosure walls and cable routing. The flange measures 91.3 mm across and provides a stable interface for compact machine frames. Standard bearings carry radial loads within their permitted limits without the additional mass associated with reinforced bearings.
Electrical termination uses a single connector for power, feedback, and protective earth conductors, reducing the number of separate cable interfaces. The motor seats directly against the machine face through its flange, which supports accurate shaft alignment with the driven equipment. The keyed shaft provides positive torque transmission to pulleys, rigid couplings, or gearboxes without relying only on clamping friction. The motor has no holding brake, so an external brake, mechanical clamp, or drive-applied torque must secure a stationary load when necessary. Its length code 6 indicates the magnetic stack depth selected for the motor’s torque capacity. An oil seal is not installed, so the shaft interface should be protected from pressurized lubricant and other fluids that could enter the bearing area.
