8LSA36.E1030D900-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA36.E1030D900-3 is a three-phase synchronous motor from the 8LS Synchronous Motors series with a rated speed of 3000 rpm and a standard holding brake. It uses an optical EnDat 2.1 encoder with multi-turn capability up to 4096 revolutions and features self-cooling through free air circulation. The motor includes an angled connector for electrical connection, a mounting flange, and a shaft end with key.
Internal Product Review
The 8LSA36.E1030D900-3 is a B & R Automation 8LS synchronous motor with self-cooling free circulation. Optical EnDat 2.1 feedback and 4096-revolution multi-turn capability support precise position control in demanding servo applications. A standard holding brake and keyed shaft make integration straightforward, making the motor a strong choice for accurate motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA36.E1030D900-3 is a three-phase synchronous motor manufactured by B&R Automation for the 8LS Synchronous Motors series. Classified under the internal designation 8LSA, it serves as a rotary actuator that converts inverter output into precise torque for positioning, velocity, or tension control in industrial automation cells. A mounting flange allows the unit to be fastened directly to machine frames, supporting compact drive axes without intermediate adapters. The motor is suitable for pick-and-place modules, conveyors, and indexing tables that require repeatable motion and electronic commutation.
At a rated speed of 3000 rpm, the rotor supports continuous operation, while the stator uses a self-cooling design with free air circulation to dissipate heat through the housing surface. Power and feedback conductors exit through an angled swivel connector, reducing cable bend stress inside enclosures and allowing the connection angle to suit the available routing space. Position feedback is supplied by an optical EnDat encoder that transmits absolute position data using protocol revision 2.1, enabling compatible drive controllers to regulate motion with digital feedback. The mechanical interface uses a keyed shaft that transfers torque directly to couplings or gears. Its mounting pattern accommodates compatible automation gearheads and supports secure alignment between the motor and driven equipment.
The square flange measures 91.3 mm across, providing a compact mounting surface for the motor housing. The motor includes a standard holding brake that locks the shaft when the DC bus is disabled, helping prevent unintended movement of the connected load. Encoder resolution reaches 13/12 bits, while absolute position tracking covers 4096 revolutions in multi-turn operation, eliminating the need for a homing cycle after a power interruption. A factory-installed oil seal protects the front bearing and helps prevent lubricant from passing through the shaft opening. The motor uses a standard bearing set without reinforcement, and length code 6 indicates the active magnetic stack used for this configuration. Product revision 3 applies to the motor’s winding and electronics package.
