Product Description:

The 8LSA36.E0030D000-3 is a three-phase synchronous motor manufactured by B&R Automation within the 8LS Synchronous Motors series. Built under the 8LSA configuration, it uses standard bearings without reinforcement and installs through a mounting flange for straightforward integration. The unit serves as a compact prime mover for positioning tables, pick-and-place gantries, and similar motion axes where servo accuracy and cycle repeatability are required. A connector-based power and feedback interface, along with a swivel cable exit, simplifies installation inside densely packed electrical cabinets and machine frames.

The drive reaches a rated speed of 3000 rpm, giving controllers a wide operating range before field weakening. Thermal loads are handled by a self-cooling housing that relies on free air circulation instead of forced ventilation. The mounting flange has an outside diameter of 91.3 mm, so the motor aligns with gearboxes or direct-drive assemblies that share this mounting pattern. Power and encoder leads depart through an angled connection that can be swiveled to accommodate cabinet depth and strain-relief orientation. Rotor position is measured by an integrated optical EnDat feedback system, allowing absolute position reporting without additional sensors.

The feedback electronics comply with protocol version 2.1 and provide a 13-bit single-turn resolution with 0 multiturn bits, meeting the precision demands of light assembly robots and electronic insertion equipment. A smooth shaft end eliminates keyways, reducing microvibration in high-speed couplings, while the absence of a holding brake keeps inertia low for rapid reversals. B&R lists this model as product revision 3, aligning its motor parameters with compatible drive parameter sets. The motor has length code 6 for the active stack and does not include an oil seal, making it suitable for dry operating areas.