Product Description:

B&R Automation manufactures the 8LSA35.E3060D200-0 in the 8LS Synchronous Motors series. Built for servo-class motion loops, the unit drives positioning, conveying, and packaging machinery that demand precise velocity regulation and quick indexing. Its compact body reduces installed depth, and the standardized face mount lets it fit existing machine frames without major bracket changes. This layout helps keep the drive package small in equipment where available mounting space is limited.

The motor employs a three-phase synchronous winding set, giving it sinusoidal back EMF for smooth torque generation. A nominal operating point of 6000 rpm allows high cycle frequencies with small transmission ratios, which is useful in fast indexing and transfer applications. The mounting flange measures 91.3 mm across, aligning the stator concentrically with the driven load. An integrated standard holding brake secures vertical or suspended axes when power is removed. Heat from copper losses is removed by self-cooling with free circulation, so the motor relies on ambient airflow rather than external air or liquid loops. The 8LSA designation indicates a standard build without reinforced bearings, and electrical termination uses a molded connector for a compact connection point.

Cabling leaves the housing through an angled swivel connector position, making it easier to guide power and feedback leads along tight machine envelopes. A smooth shaft simplifies the attachment of clamped hubs or press-fit pulleys where keyways are unnecessary. The motor has no shaft seal, so it should be mounted outside zones where lubricant could migrate along the shaft bore. With a build length code 5, the rotor stack provides a medium body length for applications that need moderate continuous power without excessive installed depth.