Product Description:

The 8LSA35.E3060D000-0 is a three-phase synchronous motor produced by B&R Automation for the 8LS Synchronous Motors series. As an electromechanical actuator, it supplies commanded torque and speed for positioning or continuous-duty axes in industrial automation lines. Its standard 8LSA mechanical configuration, listed as having no reinforced bearing, keeps the assembly compact while matching the dynamic requirements of packaging machines, printing stations, and small pick-and-place gantries.

At a rated speed of 6000 rpm, the rotor can deliver high peripheral velocity without external gearing. The motor mounts against machinery via a flange that measures 91.3 mm across, allowing direct coupling to compact gearheads or belt pulleys. Heat is removed through a self-cooling, free circulation design, so no dedicated blower or liquid circuit is required. Power and feedback leads exit the housing through an angled swivel connection that eases cable routing in tight control cabinets, and the termination style is a field-installable connector. The motor body is drilled for a flange interface, and no oil seal is fitted, so installation should avoid fluid splash zones.

The shaft interface is a smooth shaft, simplifying press-fit couplings and eliminating keyway stress concentrations. For power-off holding, the unit is supplied with no holding brake. The housing follows length code 5, which matches the dimensional envelope used for this version of the series. Final attachment to the machine frame is through the integral mounting flange, and the connection hardware sits inside a molded angled hood to protect conductors during motion. With a standard bearing package and an omitted oil seal, this configuration is intended for dry, particulate-free environments.