8LSA35.E3030D200-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA35.E3030D200-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series, featuring a self-cooling principle with free circulation and a standard holding brake. It is designed with a 91.3 mm flange, a smooth shaft, and supports angled connector connections. The motor has a rated speed of 3000 rpm and does not include an oil seal.
Internal Product Review
The 8LSA35.E3030D200-0 is a three-phase synchronous motor from B & R Automation built for precise industrial motion. A rated speed of 3000 rpm and self-cooling free circulation support efficient performance in continuous-duty equipment. An angled swivel connector and a standard holding brake add practical installation flexibility and dependable stopping control, making the motor a strong choice for automation systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B&R Automation’s 8LSA35.E3030D200-0 belongs to the 8LS Synchronous Motors series. It functions as a three-phase servo actuator that provides controlled rotary motion for industrial machinery. The motor can couple directly to gearboxes, timing belts, or load shafts, supporting closed-loop motion in automated pick-and-place, forming, and inspection stations. Its synchronous operation allows a compatible servo drive to regulate torque, speed, and position throughout repetitive production cycles.
The motor is a three-phase synchronous motor, so its stator windings create a rotating magnetic field that remains synchronized with the rotor during electronic commutation. A rated speed of 3000 rpm supports typical conveyor, indexing, and spindle velocities without requiring a speed-increasing transmission. Heat is removed through self-cooling with free air circulation, eliminating the need for an external blower while allowing surface convection to control winding temperature. The mounting face has a 91.3 mm flange dimension, which provides the mating geometry needed for direct attachment to a compatible machine frame. A standard holding brake is integrated at the non-drive end and supplies static holding torque when power is removed. This brake helps prevent vertical or indexing loads from drifting during a controlled stop or power interruption.
Cable routing is supported by an angled swivel connection that can be rotated to reduce strain and accommodate restricted installation space. Power and feedback wiring terminate at a single connector, reducing the number of separate connection points on the housing. The output interface uses a smooth shaft, allowing a clamp coupling to transfer torque without requiring a keyway. Mechanical attachment is provided through a mounting flange, while mounting feet and separate face plates are not included. The A-design configuration uses a standard bearing set without reinforcement. Length code 5 indicates a medium stator stack that balances continuous torque capacity with a compact overall length. The motor does not have an oil seal, so the installation should prevent coolant spray from being directed at the shaft opening.
