8LSA35.DB060S200-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 8LSA35.DB060S200-3 is a three-phase synchronous motor manufactured by B & R Automation and is part of the 8LS Synchronous Motors series. It features a standard holding brake, a flange dimension of 91.3 mm, and uses inductive EnDat encoder technology with 19/12 bit single and multi-turn resolution. The motor has a rated speed of 6000 rpm, is self-cooled by free circulation, and is equipped with a single-cable hybrid connector for connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA35.DB060S200-3 synchronous motor is produced by B&R Automation for the 8LS Synchronous Motors series. Built as a three-phase unit, it converts drive current into controlled rotary motion for precision axes in packaging lines, machine tools, and material-handling systems. Its compact footprint and integrated feedback allow the motor to serve as the primary actuator wherever coordinated motion and rapid positioning are required in industrial automation. The motor can support applications that require repeatable acceleration, deceleration, and position control when paired with a compatible drive.
This model follows the 8LSA standard configuration, so no reinforced bearing is installed at the drive end. A single-cable hybrid solution carries both power and encoder signals through one shielded line that connects to the rear of the motor. Thermal management relies on self-cooling through free air circulation, so the housing does not require an auxiliary blower. Mechanical attachment uses a 91.3 mm square flange, providing rigid alignment with gearboxes or direct-drive loads. The winding supports continuous operation at speeds up to 6000 rpm. A standard holding brake clamps the rotor to prevent drift when power is removed or an emergency stop occurs. Adequate clearance around the housing helps maintain the airflow needed to remove heat during operation.
Feedback and electronic identification are provided by an inductive EnDat encoder that communicates through EnDat 2.2. It provides a 19-bit single-turn resolution and a 12-bit multi-turn resolution, allowing the drive to monitor angular position across multiple rotations. The encoder stores absolute position over 4096 revolutions, so position information remains available after a power cycle. A smooth shaft accepts friction-locked couplings for transferring torque without a keyway. Length code 5 indicates the stack depth of the active magnetic circuit. The motor does not include an oil seal, so it should be installed where fluids cannot enter around the shaft. The product is revision 3, indicating its current electrical and mechanical release.
