8LSA26.R0060D000-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA26.R0060D000-0 is a three-phase synchronous motor from the 8LS Synchronous Motors series with a rated speed of 6000 rpm and a flange dimension of 58 mm. It features a resolver encoder, self-cooling with free air circulation, and an angled connector for wiring. The motor has a smooth shaft, does not include an oil seal or holding brake, and offers a mounting flange configuration.
Internal Product Review
The 8LSA26.R0060D000-0 is a B & R Automation three-phase synchronous motor with self-cooling free circulation. Resolver feedback and 10 arcmin precision support accurate motion control and stable servo performance. The angled swivel connection aids clean installation, and the 6000 rpm rated speed stands out as a key performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA26.R0060D000-0 is a three-phase synchronous motor produced by B&R Automation for the 8LS Synchronous Motors series. It connects an electrical drive module to a mechanical load and provides controlled rotary motion for positioning and speed-regulated axes in industrial machinery. The motor is suitable for equipment such as handling systems, packaging machines, and automated assembly stations where repeatable movement is required. Its 8LSA designation indicates the standard configuration without reinforced bearings, while frame length code 6 places the housing between the compact and higher-torque models in the series.
The motor operates at a rated shaft speed of 6000 rpm, supporting high-cycle motion and spindle applications within the permitted operating range. Its mechanical accuracy is 10 arcmin, making it suitable for moderate-precision positioning tasks. Heat is removed through self-cooling with free circulation, so the housing does not require an external blower or liquid-cooling circuit. The mounting face has a flange dimension of 58 mm, providing a compact interface for compatible machine plates and gear assemblies. Rotor angle is measured by a resolver, which supplies analog sine-cosine feedback and remains resistant to electrical noise and elevated temperatures. The standard configuration does not include an oil seal, so the shaft area should be protected from oil, excessive moisture, and other contaminants during operation.
Power and feedback conductors are routed through an angled swivel connector, allowing the cable exit direction to be adjusted in confined installation spaces. The output interface uses a smooth shaft, which supports clamping couplings and avoids the concentricity variation that can occur with a keyway. The motor has no built-in brake, so an external holding device is required when a stationary load must remain secured after motor power is removed. A mounting flange fastens the motor to the machine and provides a rigid supporting surface without additional foot mounts. The standard bearing set carries the radial and axial loads permitted for this motor size, but it is not reinforced for unusually high loading. Sealed terminal hardware connects with the designated series cables and helps protect the electrical contacts from dust and incidental contamination.
