8LSA25.E9060D000-0 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA25.E9060D000-0 is a three-phase synchronous motor and part of the 8LS Synchronous Motors series. It features a flange dimension of 58 mm, a smooth shaft end, and a rated speed of 6000 rpm. This motor uses self-cooling with free circulation and has an angled connector for electrical connections.
Internal Product Review
The 8LSA25.E9060D000-0 is a B & R Automation three-phase synchronous motor built with self-cooling free circulation and a mounting flange. An angled swivel connector supports clean cable routing, and the 6000 rpm rated speed makes the motor a strong choice for dynamic servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA25.E9060D000-0 is a three-phase synchronous motor produced by B&R Automation for the 8LS Synchronous Motors series. Serving as the drive element in positioning stages, pick-and-place heads, and compact conveyors, the unit supplies repeatable torque and speed under servo drive control. Its mechanical outline follows the 8LSA designation, giving the motor a standard frame for integration into industrial automation equipment. The permanent-magnet rotor responds to drive commands with the controlled motion required for applications involving frequent acceleration, deceleration, and positioning.
Its nominal operating ceiling is 6000 rpm, which is the maximum continuous shaft speed the drive can command without exceeding thermal or mechanical limits. A front-face flange measuring 58 mm provides the reference diameter for centering and fastening the motor to a machine plate. The three-phase synchronous design produces consistent torque during each electrical cycle and maintains precise rotor position for closed-loop control. Cooling uses self-cooling with free air circulation, so no external fan or liquid circuit is required during standard operation. Cabling exits through an angled swivel connector, allowing strain-relieved routing where installation space is limited.
Power and feedback conductors connect through a compact series-compatible connector that follows the established pin arrangement. The motor attaches to machinery with a dedicated mounting flange, which supports accurate alignment with the driven equipment. Mechanical output is delivered through a smooth shaft that accepts press-fit couplings or clamp collars without requiring a keyway. The motor has no holding brake, so vertical-axis applications must use an external brake or drive torque to prevent back-driving when power is removed. Its housing uses length code 5 to indicate the axial configuration associated with this model. The shaft assembly is supplied without an oil seal, which makes the motor more suitable for clean operating areas where liquid contamination is not expected.
