8LSA25.E5060C200-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA25.E5060C200-3 is a three-phase synchronous motor from the 8LS Synchronous Motors series and features an optical EnDat encoder with multi-turn capability of 4096 revolutions. It has a rated speed of 6000 rpm, a flange dimension of 58 mm, and comes with a standard holding brake and a smooth shaft. The motor uses self-cooling with free air circulation and allows for mounting by flange.
Internal Product Review
The 8LSA25.E5060C200-3 is a B & R Automation three-phase synchronous motor with self-cooling, free circulation. Optical EnDat feedback with EnDat 2.1 supports precise motion control and dependable position data. A standard holding brake and 4096-revolution multi-turn capability make the motor an excellent fit for demanding servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA25.E5060C200-3 is a three-phase synchronous motor produced by B&R Automation in the 8LS Synchronous Motors series. It provides rotational power for positioning axes and continuous-duty drives in industrial automation. The motor converts controlled three-phase electrical power into precise shaft motion when paired with a compatible drive inverter. A flange interface secures the housing to the machine, while the smooth shaft supports direct connection to a gearbox, pulley, or clamping coupling. This arrangement is suitable for compact machinery that requires accurate speed and position control without a keyed shaft connection.
Rated operation reaches 6000 rpm, allowing high-speed cycles when the drive inverter supplies the required output frequency. The mechanical interface uses a 58 mm square flange, which aligns the motor with compact actuator frames and mounting plates. Electrical conductors terminate in a connector housing, and the cables exit through a straight top connector to support vertical routing. Heat is removed by self-cooling with free air circulation, so the motor does not require an external fan or liquid-cooling jacket. Rotor position feedback is provided by an optical EnDat encoder that operates with the EnDat 2.1 interface. The encoder offers a 13/12-bit resolution for single-turn and multi-turn position values. Length code 5 indicates the stator stack depth associated with the motor’s torque characteristics. The motor does not have an oil seal, which reduces shaft friction in applications protected from coolant and lubricant spray.
A standard holding brake secures the shaft when power is removed, helping prevent a stationary load from moving. Absolute position tracking is supported by a multi-turn capacity of 4096 revolutions, allowing the feedback system to retain the shaft’s revolution count across shutdowns. The motor is produced as revision 3, with the corresponding connector pinout and system mapping. Its standard bearing arrangement does not include reinforced bearings and is intended for loads within the normal operating range of this motor frame. The connector location provides direct access from above and keeps power and feedback cables away from the shaft coupling area. The oil-seal-free shaft interface is best suited to clean, dry operating areas where the motor is not exposed directly to process fluids.
