8LSA24.D5060S200-3 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8LSA24.D5060S200-3 is a three-phase synchronous motor in the 8LS Synchronous Motors series with a rated speed of 6000 rpm. It features an optical EnDat 2.1 encoder with multi-turn capability and a resolution of 23 single-turn and 12 multi-turn bits. This motor supports a self-cooling, free circulation system and includes a standard holding brake and mounting flange.
Internal Product Review
The 8LSA24.D5060S200-3 is a B & R Automation three-phase synchronous motor with self-cooling, free circulation. The optical EnDat encoder and 23/12 single-/multi-turn-bit resolution support precise feedback and strong motion control performance. A standard holding brake and rated speed of 6000 rpm make this model a very capable choice for fast, controlled servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8LSA24.D5060S200-3 is a three-phase synchronous motor manufactured by B&R Automation within the 8LS Synchronous Motors series. Intended for industrial automation axes, it supplies controlled torque and speed when driven by a compatible servo inverter. The model carries the 8LSA designation, indicating a standard build without reinforced bearings, and it is delivered as product revision 3. Mechanical power is transmitted through a smooth shaft, while the mounting flange supports secure alignment within machine frames. This arrangement is suitable for compact positioning axes, handling systems, and packaging equipment that require controlled rotary motion.
The motor reaches a rated output speed of 6000 rpm, allowing high-velocity positioning in compact machinery. Its 58 mm flange provides the mounting face used to connect compatible gearheads or brackets and align the motor concentrically. Feedback is provided by an optical EnDat encoder that communicates position and diagnostic data through the hybrid connection. The single-cable solution with a hybrid connection combines motor power and feedback wiring, reducing the number of cables routed between the motor and drive. Position data is supplied with a 23/12-bit single-turn and multi-turn resolution, allowing the motion controller to regulate small position increments throughout the operating speed range. Self-cooling through free air circulation removes heat from the stator without external fans or liquid-cooling circuits. A connector housing accommodates the power, signal, and brake terminations in one connection area.
The encoder supports multi-turn counting across 4096 revolutions, allowing the axis to retain its absolute position after a power interruption. Communication uses EnDat 2.1, which supports position transmission, cyclic redundancy checks, and temperature data. A standard holding brake locks the rotor when the drive is disabled, helping prevent back-driving when the motor operates with a vertical load. The motor has no oil seal, so it should be installed where fluids are not expected to reach the shaft opening. Length code 4 indicates the active stack length used for this motor configuration. Connector-based cabling provides a detachable interface for routing the combined electrical connections to the drive.
