Product Description:

The 8LSA23.R0060D000-3 synchronous motor is produced by B&R Automation and belongs to the 8LS Synchronous Motors series. As a three-phase unit, it supplies controlled rotary motion for indexing tables, small gantries, and other machinery where coordinated movement is required across frequent start-and-stop cycles. Integrated resolver feedback and a standardized flange allow the motor to mount on servo axes, while the machine controller manages position, velocity, and torque during operation with a compact installation layout.

The motor has a rated speed of 6000 rpm, which supports high shaft velocity before field weakening is required and helps keep cycle times short in fast-moving stations. Heat is removed through self-cooling with free circulation, so no external fan or liquid circuit is required and surrounding machine space can remain less crowded. Rotor position is measured by a resolver, providing noise-resistant analog feedback for closed-loop control even where electrical interference is present. The mounting interface uses a 58 mm square flange, and positional repeatability is held within 10 arcmin for mid-range accuracy on packaging, assembly, and transfer equipment.

Power and feedback lines exit through an angled swivel connector, letting cables route close to the machine frame without strain and making tight routing paths easier to manage. The output side uses a smooth shaft, so torque is transferred through clamp or friction couplings rather than keys. Fastening is done through a mounting flange, and the motor uses a standard bearing without reinforcement for moderate radial loads typical of belt drives and similar transmission parts. The design omits a holding brake and an oil seal, which reduces inertia and maintenance, while length code 3 and product revision 3 indicate the stack depth and current generation of this motor.