8I74T400150.0P-000 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
37 Seconds
The B & R Automation 8I74T400150.0P-000 is an inverter from the 8I7 ACOPOS Inverters series and features 1.5 kW motor power with a nominal output current of 4.1 Amps. The unit has 3 analog inputs, 6 digital inputs, and a protection rating of IP20. It measures 45 mm wide, 317 mm high, and 245 mm deep, with a weight of 1.705 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I74T400150.0P-000 is a compact inverter module produced by B & R Automation. It belongs to the 8I7 ACOPOS Inverters series. The unit converts fixed-frequency mains power into a variable-frequency output that allows precise torque and speed control of connected AC motors, making it a common building block for conveyors, packaging equipment, and material-handling cells in industrial automation.
The control electronics accept 3 analog inputs that can be scaled for speed or torque references. The inverter provides 6 optically isolated digital inputs, and channel five can process encoder or pulse-train signals up to 20 kHz for high-resolution position capture. The power stage supplies a continuous motor output of 1.5 kW, supported by a nominal output current of 4.1 A. Its apparent power reaches 4.2 kVA when supplied with 500 VAC, indicating the available vector-controlled drive capacity before derating. During braking cycles, the internal chopper connects to an external resistor with a minimum resistance of 54 Ω, preventing excessive current during energy dissipation. The available input channels allow a controller to sequence motion events while the power stage maintains suitable thermal margins at the rated load.
For cabinet installation, the housing measures 45 mm wide, 245 mm deep, and 317 mm high, allowing it to occupy a narrow section of the mounting panel. The unit has a mass of 1.705 kg, which reduces the load placed on vertical mounting surfaces. Thermal loss under rated output is 63 W, while the inrush current is limited to 10 A to reduce the possibility of tripping upstream circuit breakers. The inverter maintains full performance at installation elevations up to 2,000 m. Communication with the controller takes place through Powerlink Type 2, which provides deterministic Ethernet communication for coordinated motion. The enclosure has an IP20 protection rating, guarding live parts against finger contact while leaving the ventilation openings unobstructed.
