8I74T400150.01P-1

Product Description:

The 8I74T400150.01P-1 sits in the 8I7 ACOPOS Inverters series by B & R Automation, built as a heat exchanger plate made from stainless steel (AISI 316). The surface layout uses an embossed chevron pattern that moves fluid across the plate faster and spreads out the heat load better. Dimensions sit at 400 mm length and 150 mm width, shaped to slide into tight assemblies where efficiency’s more important than size. With a plate thickness of 0.5 mm, the balance between surface contact and fluid flow stays in check.

Max operating temperature reaches 180°C, with a maximum working pressure of 16 bar — strong enough for heated systems where hot fluids or pressurized coolants flow in fast cycles. Seals are handled by Nitrile Rubber (NBR) gaskets, pressed in place to keep leakage out of the system. Port size is 40 mm diameter, giving decent flow without overloading the channels. At just 0.65 kg, this plate stays light enough to swap out fast during maintenance, without needing extra gear or lifting help.

No coating or heavy finish, just raw steel with corrosion resistance built into the material. The AISI 316 stainless keeps performance steady in places where fluids might contain chemicals or high mineral content. No rough edges on this either — the embossing keeps pressure zones tight and turbulence controlled. Usually goes into compact heating systems, cooling circuits, or closed-loop energy setups where thermal transfer happens fast. The 8I74T400150.01P-1 doesn’t stand out until things heat up — but once in use, it pulls heat quick, holds pressure, and keeps fluids running through without slowing the system down. A simple, solid piece that keeps thermal systems moving without drama.