8I74S200110.0P-000 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8I74S200110.0P-000 is part of the 8I7 ACOPOS Inverters series and has a motor power of 1.1 kW with an apparent power of 2.8 kVA. This inverter features 3 analog inputs, 6 digital inputs, and a 10-bit analog output resolution. It operates on a single supply phase with a nominal output current of 6.9 A and a protection rating of IP20.
Internal Product Review
The 8I74S200110.0P-000 is an ACOPOS inverter with 1.1 kW motor power and a POWERLINK interface. A 6.9 A nominal output current and 10.4 A transient current support stable drive response during short overload conditions. IP20 protection makes this unit a strong choice for controlled cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I74S200110.0P-000 is an AC inverter module produced by B & R Automation within the 8I7 ACOPOS Inverters series. The unit conditions single-phase mains power and modulates its output so that servo or induction motors in automated production lines can follow velocity and torque commands precisely. Its internal control stage regulates motor operation in response to commands received from a higher-level machine controller. Fieldbus connectivity supports the exchange of operating data, setpoints, and status information between the inverter and the connected automation system.
The module supplies up to 1.1 kW of mechanical shaft power through a continuous phase current of 6.9 A. Short load peaks are supported by a transient current of 10.4 A for 60 seconds, helping the drive manage acceleration without unnecessary interruption. The electrical input has an apparent power rating of 2.8 kVA and draws 11.5 A from a 240 VAC single-phase source. Three differential analog inputs, six 24 V digital inputs, and one 10-bit analog output accommodate speed references, control signals, and diagnostic data without additional I/O cards. Parameter data and cyclic setpoints travel over the deterministic POWERLINK interface, enabling coordinated communication with compatible B&R control platforms.
The housing measures 60 mm in width, 317 mm in height, and 245 mm in depth, allowing the module to fit inside standard industrial control enclosures. Its mass of 1.952 kg places a relatively low mechanical load on the cabinet mounting structure. Forced-convection cooling removes 64 W of internally dissipated heat, so the enclosure must provide sufficient clearance for airflow around the inverter. The IP20 enclosure prevents accidental contact with hazardous internal components and is intended for installation in a clean, dry cabinet. Single-phase compatibility allows the inverter to operate on machines without a three-phase feeder, while built-in electromagnetic compatibility filtering helps limit conducted electrical interference. The compact housing and integrated control connections make the module suitable for regulated motor-speed and torque applications where cabinet space is limited.
