8I74S200075.0P-000 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 8I74S200075.0P-000 is an ACOPOS inverter from B & R Automation, belonging to the 8I7 ACOPOS Inverters series. It offers a motor power of 0.75 kW and a nominal output current of 4.8 A, with 3 analog inputs, 1 analog output, and 6 digital inputs. The inverter has a protection rating of IP20 and weighs 1.646 kilograms.
Internal Product Review
The 8I74S200075.0P-000 is a B&R Automation 8I7 ACOPOS inverter rated for 0.75 kW motor power and 4.8 A nominal output current. Type 2 POWERLINK and 6 digital inputs support clean integration into tightly controlled automation architectures. A well-balanced inverter for compact motion applications, highlighted by IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I74S200075.0P-000 is an AC inverter released by B & R Automation for the 8I7 ACOPOS Inverters series. It converts the fixed 240 V supply found in standard machine panels into a variable-frequency, variable-voltage output that governs three-phase motors used on conveyors, pick-and-place axes, or light pump duties. Within a coordinated ACOPOS motion system, the drive supplies regulated torque, manages dynamic braking energy, and exchanges setpoints with the main PLC through deterministic Powerlink networking.
In continuous duty, the unit delivers an apparent power of 2.0 kVA, suitable for machines that require up to 0.75 kW of mechanical shaft power. The output bridge provides a nominal motor current of 4.8 A, and protective hardware must accommodate an energizing inrush of 9.6 A. Short-circuit withstand capability reaches 1 kA, and the converter endures 7.2 A of transient load for 60 seconds without shutting down. The housing carries an IP20 rating, so it is intended for mounting inside closed control cabinets. An internal chopper connects to external brake resistors no lower than 40 Ω to absorb regenerated energy during rapid deceleration, and the Powerlink Type 2 interface transports cyclic command and status data.
Control I/O is integrated into the drive. The drive offers 3 analog inputs for speed or torque references and 1 analog output that retransmits diagnostic variables to supervisory equipment. Six digital inputs process run or limit commands, and a separate safe input channel links directly to emergency stop circuitry. Electronic losses remain at only 51 W, allowing natural convection in most enclosures. With a mass of 1.646 kg, the inverter remains manageable during panel installation, while its rigid aluminum casting shields the internal boards from vibration.
