8I64T401100.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8I64T401100.000-1 is part of the 8I6 ACOPOS Inverters series and has a rated power of 11 kW. This inverter supports 3-phase input voltage from 380 to 500 VAC and features 3 analog inputs, 4 digital inputs, and one relay. It measures 184 mm in height, 142 mm in width, and 158 mm in depth, with a weight of 2.35 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I64T401100.000-1 inverter from B & R Automation belongs to the 8I6 ACOPOS Inverters series and is intended for cabinet-mounted motor control in distributed factory lines. The module accepts raw three-phase power and generates pulse-width-modulated output for induction or synchronous machines while providing programmable onboard I/O to a system PLC through the X2X real-time bus. By combining drive electronics with field-level signal handling, this product reduces wiring complexity and enables compact, coordinated motion sequences in conveyor, packaging, and material-handling equipment.
The power section accepts an input of 380 to 500 VAC through a three-phase mains connection and can deliver up to 11 kW of mechanical power to the attached motor. Logic terminals provide four digital inputs, one digital output, and a single relay; the transistor channel sources or sinks loads operating from 18 to 30 VDC. For process values, the drive offers three analog inputs and one analog output, allowing the controller to read sensor levels or issue velocity commands without additional interface cards. The chassis has a depth of 158 mm, helping the unit fit into shallow cabinet lineups while maintaining airflow around the heat sink.
All low-level logic is powered through the X2X backplane, which draws only 1.6 W from a control supply of 24 VDC; this low consumption eases loading calculations for cabinet power supplies. Each logic input presents an impedance of 12.1 kΩ, so standard PNP or NPN sensors can drive the terminals without exceeding field-device ratings. The housing is 142 mm wide and 184 mm high, while the complete assembly weighs 2.35 kg. Its compact housing supports installation in control panels where several motor axes and their associated field signals must be accommodated within limited space.
