8I64T400150.00X-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8I64T400150.00X-1 inverter is part of the 8I6 ACOPOS Inverters series and has a rated power of 1.5 kW with 3-phase input. It measures 143 mm in height, 107 mm in width, 158 mm in depth, and weighs 1.35 kg. The inverter features a digital output source circuit and supports a maximum AB counter frequency of 20 kHz.
Internal Product Review
The 8I64T400150.00X-1 is a B & R Automation ACOPOS inverter designed for 3-phase systems with a 1.5 kW power rating. A 12.1 kΩ logic input impedance with 4 ms sampling supports clean signal handling and responsive control integration. The 20 kHz AB counter capability stands out as a strong fit for motion applications requiring stable high-speed feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I64T400150.00X-1 is an inverter module manufactured by B & R Automation for the 8I6 ACOPOS Inverters series. It converts fixed-frequency, three-phase mains power into a regulated output that drives synchronous or induction motors in automated machinery. This capability allows precise speed and torque control in conveyor, packaging, and material-handling cells. Integrated logic and relay resources let the unit interact directly with sensors and actuators, so a higher-level PLC only has to send motion commands.
This inverter delivers a continuous mechanical output of 1.5 kW, which helps guide motor selection and cabinet thermal design. A three-phase input distributes current across three conductors, reducing the required conductor size and improving the power factor compared with single-phase feeds. Control wiring connects to six digital inputs with an impedance of 12.1 kΩ, minimizing current draw from upstream safety relays or transistor outputs. Each input is scanned every 4 ms, so the drive can react to limit switches or start commands without noticeable delay in high-speed indexing applications. The output stage uses a sourcing digital circuit, simplifying common-positive field wiring. Relay R2 can switch 2 A at 250 VAC and is rated for 100,000 operations, providing a convenient way to enable brakes or contactors from the same enclosure.
High-resolution feedback is accepted by the AB counter at frequencies up to 20 kHz, supporting fine position tracking with high encoder line counts. In standby, the drive has an output transistor leakage current of only 3 µA, keeping inadvertent motor energization below IEC safety thresholds. The housing requires a mounting depth of 158 mm, a front width of 107 mm, and an overall height of 143 mm. Two mounting holes spaced 121.5 mm by 93 mm secure the housing to the backplate. The unit has a mass of 1.35 kg, which limits the mechanical load on the mounting assembly. The X2x service port consumes only 1.6 W for internal electronics during programming or diagnostic work.
