8I64T400037.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
50 Seconds
The 8I64T400037.000-1 inverter is manufactured by B & R Automation and is part of the 8I6 ACOPOS Inverters series. It supports three-phase input, offers a rated power of 0.37 kW, and measures 143 mm in height, 107 mm in width, 158 mm in depth, weighing 1.35 kg. The inverter operates with a 24 VDC X2x supply voltage and has a logic input impedance of 12.1 kΩ.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I64T400037.000-1 is an inverter module from the 8I6 ACOPOS Inverters series manufactured by B&R Automation. Within an automation cell, it functions as a power interface that converts fixed-frequency mains energy into variable-frequency output for motor speed control, allowing coordinated motion or process regulation. The housing has a height of 143 mm, a width of 107 mm, and a depth of 158 mm, which supports cabinet mounting while leaving clearance for airflow. Mounting-hole dimensions of 121.5 mm by 93 mm align with standardized backplate patterns so the unit can be fastened without custom brackets.
The inverter supplies up to 0.37 kW of mechanical output from a three-phase input, a power level suitable for small conveyors, pumps, or positioning axes. Digital control is handled through logic inputs that present a high impedance of 12.1 kΩ, which minimizes loading on PLC output cards. Each input is scanned every 4 ms, so step commands or safety interlocks are detected within a single control cycle. The built-in relay R2 can switch external devices carrying 2 A at 250 VAC, allowing direct actuation of motor contactors or signal lamps. Output DO1 is implemented as a sourcing circuit with only 3 µA of off-state leakage, which helps prevent false triggering of downstream electronics.
Internal fieldbus communication is powered via the X2x interface, which needs only 1.6 W from the backplane and runs from a regulated 24 VDC control supply, isolating signal electronics from the main power section. Despite its cast heat sink and three-leg power stage, the assembly weighs just 1.35 kg, which eases installation on light-duty DIN rails or swing frames. Its compact profile and narrow width permit dense stacking of multiple inverters while keeping access clear around the top-edge terminals. This arrangement also supports orderly routing between the power wiring and the control connections.
Frequently Asked Questions about 8I64T400037.000-1:
Q: What is the rated power output of the 8I64T400037.000-1 ACOPOS inverter?
A: This unit is rated for 0.37 kW output, making it suitable for lower power applications requiring efficient control.
Q: What type of power input does the 8I64T400037.000-1 inverter require?
A: The 8I64T400037.000-1 requires a 3-phase input for operation.
Q: What is the maximum resistive load the relay R2 can support on the 8I64T400037.000-1 inverter?
A: The relay R2 on this model can handle resistive loads up to 2 A at 250 VAC.
Q: What is the logic input sampling time for the 8I64T400037.000-1 ACOPOS inverter?
A: This inverter has a logic input sampling time of 4 ms, allowing for quick input response.
Q: What are the X2x supply voltage and power requirements for the 8I64T400037.000-1 inverter?
A: The X2x supply voltage for this inverter is 24 VDC, and it draws 1.6 W of supply power.
