8I64S200075.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8I64S200075.000-1 inverter is part of the 8I6 ACOPOS Inverters series and has a rated power of 0.75 kW with an auxiliary supply power of 1.6 W. It supports single-phase input, has a weight of 0.9 kg, and measures 145 mm in height, 72 mm in width, and 138 mm in depth. Its relay service life is 100,000 operations, with a relay current of up to 2 A for resistive loads.
Internal Product Review
The 8I64S200075.000-1 is an 8I6 ACOPOS inverter optimized for single-phase installations with a 0.75 kW rated power. Low 1.6 W auxiliary supply demand and a relay service life of 100,000 operations support efficient integration and dependable long-term operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8I64S200075.000-1 single-axis inverter is produced by B&R Automation as part of the 8I6 ACOPOS Inverters series. It provides vector control for fractional-horsepower induction motors used in conveyors, indexing tables, and light pick-and-place actuators. The module occupies 138 mm of depth and 145 mm of height inside a control cabinet, allowing dense panel layouts alongside other ACOPOS modules. Its housing has panel-mount clips and a front wiring plane, which can reduce installation time on production lines.
The inverter delivers a continuous output of 0.75 kW, representing the maximum mechanical power available to the connected motor under nominal conditions. It is designed for a single-phase supply with 1 input phase, so it can operate from a standard 230 V plant supply without a three-phase feed. Control inputs present an impedance of 12.1 kΩ, limiting current draw from PLC transistor outputs and preserving signal integrity over long cables. The logic sampler evaluates each input every 4 ms, while digital outputs have a 100 µs monitoring delay for rapid detection of wiring faults. When an output is de-energized, leakage current is restricted to 3 µA, helping prevent unintended actuation of sensitive loads.
An auxiliary logic rail supplies the internal electronics with 1.6 W, so heat dissipation remains low even in sealed cabinets. The built-in changeover relay can switch resistive loads up to 2 A. For inductive circuits, the current limit is 1.5 A, and the contacts are refreshed every 8 ms to synchronize with the control loop. Electrical durability is rated at 100,000 operations, supporting long service intervals on machinery that cycles frequently. The unit weighs 0.9 kg and is 72 mm wide, enabling multi-axis arrangements on standard DIN rails without adding excessive mass to the enclosure.
