8EI8X8MWS10.0600-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 8EI8X8MWS10.0600-1 is a stainless steel linear guide with an 8mm rail width and light preload. Produced by B & R Automation as part of the 8EI Servo Drives series, it features a wide block carriage type with a single carriage. This guide offers high accuracy (Class H).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8EI8X8MWS10.0600-1 is a servo drive designed to provide precise control and ease of integration into industrial automation setups. This drive is constructed by B & R Automation which is a well-known, trusted manufacturer of automation excellence.
The 8EI8X8MWS10.0600-1 Servo Drive uses ACP10 software version V3.13.0 to configure, control and monitor the servo drive. It uses a sinking input circuit which means it pulls current to ground when activated. The maximum instantaneous power it can handle internally is 1.5 kW and externally with appropriate cooling or components is 11 kW. The level of transient overvoltage it can withstand is per EN 61800-5-1 category III. The standard operating voltage expected for its control logic and auxiliary systems is 24 volts DC. It comes with two dedicated digital inputs to enable or disable the drive operation which is used for safety or control logic. For this drive the range of acceptable input voltages is from 18 VDC to 30 VDC as it provides some tolerance for fluctuations. For larger machinery setups its encoder cable can be up to 100 meters long without signal degradation. Due to its IP 20 rating, it is protected against solid objects >12.5 mm but offers no protection against liquids which means it should be installed inside a cabinet.
The 8EI8X8MWS10.0600-1 servo drive supports EnDat 2.2 digital encoders which provide high resolution feedback and diagnostics over a digital interface. The amount of power it can continuously provide internally is 100 watts and externally 970 watts with thermal support which influences motor sizing. Each of its input is isolated from the others which prevents electrical noise or faults from propagating between inputs.
Frequently Asked Questions about 8EI8X8MWS10.0600-1:
Q: Why is SafeMOTION with digital encoder important in the 8EI8X8MWS10.0600-1 servo drive?
A: SafeMOTION ensures functional safety by monitoring motion parameters directly. The digital encoder provides precise position feedback, enhancing safety and motion accuracy.
Q: How does input capacitance of 4312 µF benefit the 8EI8X8MWS10.0600-1 servo drive?
A: The high input capacitance helps stabilize voltage during rapid load changes. It also ensures smoother operation and improved response in dynamic applications.
Q: Why is a minimum external braking resistance of 12 Ω required?
A: It prevents damage to the servo drive by safely dissipating regenerative energy. Too low resistance could cause overheating or electrical faults.
Q: What advantage does the IP20 rating offer in the 8EI8X8MWS10.0600-1?
A: While it lacks liquid protection, IP20 allows for compact cabinet installations. It suits clean industrial environments with minimal contamination risk.
Q: How does electrical isolation between input and ACOPOS P3 enhance system reliability?
A: It prevents signal interference and voltage surges from affecting control electronics. This ensures stable and safe operation in complex automation systems.
