8EI2X2MWT10.0700-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 8EI2X2MWT10.0700-1 from B & R Automation is a member of the 8EI Servo Drives series, rated for 700V and 10A. Designed with a screw clamp connection type, it supports wire sizes between 22-12 AWG and operates within a temperature range of -40°C to +115°C. It is mounted on a DIN rail for efficient installation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Admired for its durable construction and high operating characteristics, B&R Automation’s 8EI2X2MWT10.0700-1 is one of the best 8EI servo drives. Operating at a nominal ambient temperature range of 5 to 40 degrees Celsius, this powerful 8EI servo drive can withstand harsh environmental conditions, typical in industrial systems. With a mass of 3.2 kilograms, this compact servo drive can easily be installed at various mounting orientations. As part of the SafeMotion series, this ACOPOS P3 servo drive supports both single-phase and three-phase systems. To function properly in single-phase systems, the input terminal voltage must be 110 to 230 V. For three-phase systems, on the other hand, the input terminal voltage must be 200 to 230 VAC.
As a 3-axis module by B&R Automation, the 8EI2X2MWT10.0700-1 offers three holding brake ports and three encoder interfaces. The holding brake connection ports for this servo drive have a maximum internal resistance of 0.25 ohms. At any point in time, the continuous current for each of the holding brake ports must not exceed 1.3 A. Some of the protective measures incorporated for the holding brake ports of this drive are overload and short circuit protection and open circuit and undervoltage monitoring.
Like other 8EI servo drives originally designed by B&R Automation, the 8EI2X2MWT10.0700-1 also supports a braking resistor. During operation, the peak internal power rating of the braking resistor is around 1.5 kW. On the other hand, the external braking resistor can draw a peak power of 11 kW during operation. Although the braking resistor supported by the 8EI2X2MWT10.0700-1 employs short circuit protection, it does not provide ground fault protection during operation. To acquire this 3-axis module with a special product warranty for one year, message Wake Industrial’s sales team immediately.
Frequently Asked Questions about 8EI2X2MWT10.0700-1:
Q: What is the 8EI2X2MWT10.0700-1’s protection degree?
A: The 8EI2X2MWT10.0700-1 has a protection degree of IP 20.
Q: What is the maximum line length for the 8EI2X2MWT10.0700-1’s trigger inputs?
A: To establish a reliable connection for the 8EI2X2MWT10.0700-1’s trigger inputs, the line length must not be greater than 100 meters.
Q: What switching frequencies does the 8EI2X2MWT10.0700-1 support?
A: The 8EI2X2MWT10.0700-1 supports the following switching frequencies: 5 kHz, 10 kHz, and 20 kHz.
Q: What is the maximum motor cable length supported by the 8EI2X2MWT10.0700-1 at a switching frequency of 5 kHz?
A: At a switching frequency of 5 kHz, the 8EI2X2MWT10.0700-1 can accommodate a maximum motor cable length of 75 m.
Q: What is the continuous power rating of the 8EI2X2MWT10.0700-1’s DC bus connection?
A: The 8EI2X2MWT10.0700-1’s DC bus connection has a continuous power rating of 1.5 kW.
