8EI2X2MWS10.0400-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The 8EI2X2MWS10.0400-1 servo drive features a 10 mm shaft diameter, induction-hardened surface finish, core hardness of ? 35 HRC, and a length of 400 mm. Manufactured by B & R Automation as part of the 8EI Servo Drives series, it offers a material construction of steel for precise operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8EI2X2MWS10.0400-1 is a wall-mounted servo drive manufactured by the international company B&R Automation for its powerful servo motors. Released under the illustrious 8EI product series, this unit functions mainly as a servo drive, which provides the excitation power for the servo motor and protection functions. As part of the SafeMotion series, this servo drive can monitor rotor position, speed, and motion in one axis. To operate properly, this module must be connected to a fixed mains supply having a terminal voltage of 200 to 230 VAC. By default, this electrical drive works for three-phase systems, but it can also be used for single-phase supplies having a terminal voltage of 110 to 230 VAC.
Compared to other servo drives manufactured by B&R Automation, the 8EI2X2MWS10.0400-1 features a lighter and more compact construction. During operation, this module can accommodate loads with a maximum rating of 1.25 kVA. To accommodate the high inrush currents of motors during starting periods, servo drives are typically designed to withstand high electrical currents within a short switch-on interval. Based on B&R Automation’s documentation, the 8EI2X2MWS10.0400-1 can safely tolerate a maximum inrush current of 22 A for a typical switch-on interval of 60 seconds. To safely accommodate this current, however, the terminal connection cross-section for this drive must be at least 0.25 square millimeters.
In a typical automation system, servo drives such as the 8EI2X2MWS10.0400-1 are typically connected to other devices other than the servo motor. The role of the servo drive is to process signals coming from other modules or devices to variably adjust the servo motor’s output. At most, this 8EI servo drive can accommodate two trigger inputs that determine how the motor should be adjusted.
Frequently Asked Questions about 8EI2X2MWS10.0400-1:
Q: What signal transmission is used by the 8EI2X2MWS10.0400-1’s encoder interface?
A: The 8EI2X2MWS10.0400-1’s encoder interface utilizes the RS485 communication protocol for signal transmission.
Q: What is the input voltage of the 8EI2X2MWS10.0400-1’s trigger inputs?
A: The 8EI2X2MWS10.0400-1’s trigger inputs support a nominal and maximum input voltage of 24 VDC and 30 VDC, respectively.
Q: What is the nominal installation level for the 8EI2X2MWS10.0400-1?
A: The 8EI2X2MWS10.0400-1 must be installed at a nominal installation level of up to 500 m above sea level.
Q: What are the dimensions of the 8EI2X2MWS10.0400-1?
A: The 8EI2X2MWS10.0400-1 has the following dimensions: 66 mm (width), 290 mm (height), and 258.5 mm (depth).
Q: What is the mass of the 8EI2X2MWS10.0400-1?
A: The 8EI2X2MWS10.0400-1 has a net mass of 3.2 kilograms, or about 7 pounds.
