8EI2X2HWS10.0500-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The 8EI2X2HWS10.0500-1 servo drive offers a sensing distance of 10 mm, operates on a supply voltage of 10–30 V DC, and features an IP67 protection rating. Part of the 8EI Servo Drives series by B & R Automation, it is made with a durable stainless steel housing and supports a switching frequency of 500 Hz for reliable performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8EI product series by B&R Automation is one of the most notable product lines specializing in servo drive manufacturing. Characterized by their versatile performance and high switching frequencies, ACOPOS P3 servo drive modules from the 8EI series are mainly compatible with B&R servo motors and control units. The 8EI2X2HWS10.0500-1 is a specific product model released under the SafeMotion series, featuring single-axis motion control and configurable accessories. Like all other SafeMotion drives, this unit requires a three-phase power supply having a terminal voltage range between 200 and 480 VAC. Aside from supplying input power to the motor, servo drives such as the 8EI2X2HWS10.0500-1 also offer short circuit protection during operation.
The 8EI2X2HWS10.0500-1 comes with a powerful set of peripherals and connection ports. Depending on the intended operation, these ports can be configured and adjusted. At any point in time, however, the connected load for this servo drive must not exceed a maximum rating of 2.5 kVA. At starting conditions, this servo drive can temporarily withstand an inrush current of up to 45 A. To protect the servo drive from damage, however, the switch-on interval must not exceed a total period of 60 seconds. For this drive, the DC bus connection draws a typical continuous power of around 1 kW.
Aside from its configurable accessories, the 8EI2X2HWS10.0500-1 offers specific interfaces for accommodating the motor holding brake and motor encoder. During operation, the motor holding brake port must not exceed a continuous current of 1.3 A. On the other hand, the motor encoder interface for this drive must not exceed a load capacity of 300 mA. Finally, the 8EI2X2HWS10.0500-1 has two trigger inputs configured as sinks, which require a nominal input voltage of 24 VDC.
Frequently Asked Questions about 8EI2X2HWS10.0500-1:
Q: What communication protocol does the 8EI2X2HWS10.0500-1’s encoder interface use?
A: The 8EI2X2HWS10.0500-1’s encoder interface uses RS485 for signal transmission.
Q: Are the 8EI2X2HWS10.0500-1’s trigger inputs electrically isolated?
A: Yes, the 8EI2X2HWS10.0500-1’s trigger inputs are all electrically isolated.
Q: What is the nominal loss of the 8EI2X2HWS10.0500-1 in standby mode?
A: In standby mode, the 8EI2X2HWS10.0500-1 has a nominal loss of 12.2 W.
Q: What is the ideal ambient temperature range for the 8EI2X2HWS10.0500-1 during operation?
A: During operation, the 8EI2X2HWS10.0500-1 has an ideal ambient temperature range of 5 to 40 degrees Celsius.
Q: How much does the 8EI2X2HWS10.0500-1 weigh?
A: The 8EI2X2HWS10.0500-1 weighs around 3.2 kilograms.
