8EI2X2HWS10.0400-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 8EI2X2HWS10.0400-1 is a stainless steel servo drive component with a polished surface finish and weighs 0.35 kg. Manufactured by B & R Automation as part of the 8EI Servo Drives series, it has a length of 400 mm and a diameter of 10 mm. It features high corrosion resistance and a tensile strength of 700 MPa.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8EI2X2HWS10.0400-1 is a subproduct of B&R Automation’s powerful SANMOTION servo drive series. As part of the SafeMotion product umbrella, this servo drive requires a three-phase mains input voltage of 200 to 480 V to operate properly. Similar to other three-phase drives and electrical modules, this unit can run at a system frequency of 50 to 60 hertz. The choice of frequency depends mainly on the location or intended application. Usually, electrical systems in Europe and Australia utilize 50 hertz systems, whereas most of America uses 60 hertz systems. Like all other 8EI drives by B&R Automation, this product has seamless compatibility with other servo motors and control devices released by B&R.
The 8EI2X2HWS10.0400-1 supports wall-mounting and can be fixed via a set of mounting screws. As a single-axis module, this servo drive has robust capabilities in monitoring rotor position and speed for a single motor. Similar to other single-axis modules under the SafeMotion series, the 8EI2X2HWS10.0400-1 provides a powerful set of status indicators for intuitively guiding the user about the drive’s operating conditions. Some of the LED status indicators provided are as follows: PLK, R/E, SE, and Ax1. Each of the LEDs can change colors corresponding to the status of a particular drive parameter.
As a compact servo drive, the 8EI2X2HWS10.0400-1 has a continuous current rating of 2.2 A. Like all other servo drives from the 8EI product series, this module utilizes the EnDat protocol for processing motor encoder data. It offers one slot for plug-in modules and peripherals for establishing RJ45 communication protocol. During operation, this B&R servo drive achieves a continuous power of 1 kW and a maximum output frequency of 598 hertz.
Frequently Asked Questions about 8EI2X2HWS10.0400-1:
Q: What is the normal switching frequency of the 8EI2X2HWS10.0400-1?
A: The 8EI2X2HWS10.0400-1 has a normal switching frequency of 5 kHz.
Q: What other switching frequencies are possible with the 8EI2X2HWS10.0400-1?
A: Although the 8EI2X2HWS10.0400-1 has a default switching frequency of 5 kHz, it can safely be configured to operate at a switching frequency of either 10 or 20 kHz.
Q: What is the maximum continuous current allowed by the 8EI2X2HWS10.0400-1 for the holding brake?
A: If the servo motor has a holding brake, the 8EI2X2HWS10.0400-1 allows a maximum continuous current of 1.3 A.
Q: What protection features are available with the 8EI2X2HWS10.0400-1?
A: The 8EI2X2HWS10.0400-1 offers short-circuit protection.
Q: What type of encoder connection port does the 8EI2X2HWS10.0400-1 employ?
A: The 8EI2X2HWS10.0400-1 employs an 8-pin female mini I/O connector for its encoder.
