8EI2X2HWD10.0500-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 8EI2X2HWD10.0500-1 is a 2-axis module servo drive from the 8EI Servo Drives series by B & R Automation. It operates with a continuous current of 2.2 Amps and supports input voltages of 3x 200 to 480 VAC. This model features wall mounting, an internal braking resistor, and a hardwired STO safety option with encoder.
Internal Product Review
The 8EI2X2HWD10.0500-1 is an ACOPOS P3 2-axis servo drive from B & R Automation with a clean, application-ready design. A 2.2 Aeff continuous current rating and 3x 200-480 VAC input give the drive solid flexibility for demanding motion setups. Wall mounting and an internal braking resistor make this model a very practical choice for efficient cabinet integration and controlled deceleration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8EI2X2HWD10.0500-1 is a servo drive module produced by B&R Automation for the 8EI Servo Drives series within the ACOPOS P3 8EI servo drive platform. It supplies power and closed-loop control to two motor axes used in synchronized industrial automation tasks. The module connects directly to multi-axis machine controllers through the series backplane, supporting coordinated motion without separate communication wiring between adjacent drive modules.
The module accepts a supply of 3 × 200–480 VAC, allowing it to operate from a broad range of three-phase mains sources. Each axis provides a continuous current of 2.2 A RMS for sustained motor operation within the drive’s thermal limits. Its two-axis module design reduces cabinet space compared with installing two separate single-axis units. Safety functions use hardwired STO technology with encoder support, allowing both motor channels to enter a torque-free state through discrete wiring rather than network commands. The housing supports wall mounting, while cabinet airflow removes heat generated during operation. An integrated braking resistor dissipates regenerated energy produced when connected motors decelerate, reducing the amount of energy returned to the shared power system.
Signal and power conductors terminate on a two-row connector set, while the single-row connector arrangement is not fitted. The module does not include a plug-in module, so its primary control and axis functions are handled by the base unit. It is supplied without a front cover, leaving the status indicators accessible for direct viewing inside the cabinet. Connector coding helps prevent incorrect cable placement during installation, and factory-set parameters provide baseline operating values for the supported motor channels. The standard module configuration does not require customized ordering options. Its compact arrangement allows the two controlled axes to share the same housing, backplane connection, safety interface, cooling path, and regenerative braking components while retaining independent motor control channels.
