8EI1X6MWS10.0600-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships Fast
The 8EI1X6MWS10.0600-1 is an industrial linear actuator with a stroke length of 600 mm and a protection class of IP65. Manufactured by B & R Automation as part of the 8EI Servo Drives series, it operates at an input voltage of 24 V DC. The actuator is made from an aluminum alloy body and supports a maximum load of 1000 N.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8EI1X6MWS10.0600-1 8EI Servo Drive is designed for accurate motor control in small automation systems. This drive has a single slot for a plug-in module to allow flexible hardware extension to accommodate application-specific needs without modifying the base unit.
Manufactured by B & R Automation, this servo drive accommodates TN-S and TN-CS network configurations with a grounded neutral for safe operations in grounded power systems. The 8EI1X6MWS10.0600-1 servo drive accepts a broad input voltage range of 1x 110–230 VAC (single-phase) and 3x 200–230 VAC (three-phase). This voltage compatibility enables this servo drive to operate optimally under various power infrastructures. The installed load capacity is a maximum of 1 kVA to position this drive to handle moderate power needs in motion control applications. With a DC bus capacitance of 1880 µF, this servo drive has consistent voltage buffering and energy-ready supply during quick changes in loads or regeneration phases. The switching-on interval for this servo drive is rated at an average of 60 seconds to ensure rapid operational readiness with reduced startup delay.
For feedback systems, the 8EI1X6MWS10.0600-1 accommodates the EnDat 2.2 encoder interface with high-resolution, two-way communication between the drive and motor. The temperature sensor support for this servo drive ranges from 500 Ω to 5 kΩ to provide compatibility with standard industrial sensors for precise thermal monitoring. The internal braking resistor of this drive is capable of withstanding the peak power of 1.5 kW, while an external resistor can have up to 11 kW. This double setup guarantees controlled braking in normal as well as heavy-duty applications. The 300 mA encoder load current of this drive is used for robust power delivery to a wide range of encoders.
Frequently Asked Questions about 8EI1X6MWS10.0600-1:
Q: Why does the 8EI1X6MWS10.0600-1 include only one plug-in module slot?
A: It allows focused hardware customization without increasing the drive’s physical footprint. This ensures compactness and dedicated expansion based on system needs.
Q: How does the 1880 µF DC bus improve performance?
A: It provides energy buffering during load transitions, maintaining voltage stability. This helps prevent undervoltage faults in fast motion applications.
Q: What is the purpose of the EnDat 2.2 encoder protocol in 8EI1X6MWS10.0600-1?
A: It ensures precise digital position feedback and bidirectional communication. This increases control accuracy and simplifies system diagnostics.
Q: How does external braking resistor support up to 11 kW benefit operation?
A: It enables efficient deceleration in high-inertia systems without overloading internal components. This is useful in systems with sudden stop requirements.
Q: Why is a 0.4 kW continuous power rating suitable for single motor outputs?
A: It balances energy use with consistent torque delivery in smaller motors. Ideal for synchronized operations in modular setups.
