8BVP0880HC00.004-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The B & R Automation 8BVP0880HC00.004-1 is a power supply from the 8BVP ACOPOS Power Supplies series with a continuous power rating of 60 kW and peak power of 120 kW. It offers a rated current of 88 Amps, supports a DC bus nominal voltage of 750 VDC, and has an IP20 degree of protection. The unit is equipped with a fan continuous current of 4.2 Amps and a nominal switching frequency of 5 kHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8BVP0880HC00.004-1 power module is produced by B & R Automation as part of the 8BVP ACOPOS Power Supplies series. The unit converts a three-phase mains connection into a regulated DC bus and an auxiliary 24 V rail so multiple servo inverters can share a common energy source. In automated lines, this centralized supply simplifies cabinet wiring, delivers coordinated braking energy, and maintains stable voltage for motion and safety electronics.
Its DC link operates at 750 VDC, buffered by 1650 µF of bus capacitance that absorbs regenerative surges from connected drives. During continuous duty, the supply can furnish 60 kW while supporting installed machine loads up to 62 kW; for rapid acceleration phases, it tolerates a short-term output of 120 kW. The power path is rated for 88 A, and a nominal switching frequency of 5 kHz keeps output ripple within servo tolerance bands. A 0.9 µF discharge network accelerates capacitor bleed-down after shutdown, and the dedicated 24 V input, which is 25 VDC with a ±1.6% window, energizes control logic. The auxiliary 24 V rail itself is smoothed by 4.7 µF, limiting transient voltage dips seen by field-level sensors.
Startup demands are addressed by an inrush limiter that caps line surge to 133 A at 400 VAC, preventing nuisance trips on upstream circuit breakers. Forced-air cooling is provided by internal fans that draw 4.2 A under normal operation and are electronically curtailed if the overcurrent threshold of 10 A is approached. The housing carries an IP20 degree of protection, suitable for installation inside closed switchgear. Even when drives are idle, standby losses remain at only 10.8 W, reducing panel heat. A 24 V trigger input allows coordinated enable signals from safety PLCs to bring the supply online without additional relays.
Frequently Asked Questions about 8BVP0880HC00.004-1:
Q: What is the continuous power rating of the 8BVP0880HC00.004-1 ACOPOS power supply?
A: The 8BVP0880HC00.004-1 ACOPOS power supply from B & R Automation can continuously deliver 60 kW of power.
Q: What is the peak power capacity of the 8BVP0880HC00.004-1 power supply?
A: This model has a peak power capacity of 120 kW for handling short, high-demand loads.
Q: What is the nominal DC bus voltage of the 8BVP0880HC00.004-1?
A: The nominal DC bus voltage for this model is 750 VDC, supporting high-performance industrial applications.
Q: What degree of protection does the 8BVP0880HC00.004-1 provide?
A: This ACOPOS power supply operates with a degree of protection rated at IP20.
Q: What is the rated current output of the 8BVP0880HC00.004-1 power supply?
A: The 8BVP0880HC00.004-1 supports a rated current output of 88 A for connected devices.
