8BVI0880HCS0.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 8BVI0880HCS0.000-1 servo controller features a rated voltage of 400 V AC and a rated output power of 1.0 kW. Manufactured by B & R Automation, it belongs to the 8BVI Servo Controllers series and offers flange mounting with IP65 protection. This controller operates at a rated speed of 3000 rpm and includes an incremental encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The B & R Automation 8BVI0880HCS0.000-1 Inverter Module integrates a robust design with compact dimensions and supports two plug in module slots. It allows cold plate or pass through mounting and is designed to operate with consistent performance in varied industrial environments.
This 8BVI0880HCS0.000-1 inverter module includes two trigger inputs that are configured with a sink type circuit. Both inputs are electrically isolated from each other and from the inverter module. The electrical isolation is maintained between input-input and input-inverter module connections. The module operates at a nominal input voltage of 24 VDC with a maximum of 30 VDC. Its switching threshold for a low signal is less than 5 V while for a high signal, it must exceed 15 V. At the nominal input voltage, the current draw is approximately 10 mA. For temperature monitoring, the unit includes one sensor connection supporting a resistance range from 500 ? to 5 k?. The discharge capacitance is rated at 0.44 uF. The inverter module also complies with important electrical standards including Pollution Degree 2 (non-conductive) and Overvoltage Category
based on EN 61800-5-1. Its degree of protection is IP20 according to EN 60529. These specifications support its safe integration into controlled electrical systems where environmental protection and electrical isolation are essential.
The 8BVI0880HCS0.000-1 inverter module also offers flexible installation orientations including vertical hanging and horizontal face up configurations. The mechanical design includes a width of 213.5 mm and a height of 317 mm. The depth varies slightly with the mounting method-212 mm for cold plate mounting and 209 mm for pass through mounting. The weight of the module is approximately 7.1 kg that makes it a solid yet compact unit for panel or cabinet integration.
