8BVI0220HWSS.000-1
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The 8BVI0220HWSS.000-1 from the 8BVI Servo Controllers series by B & R Automation features a 22 mm stainless steel shaft and a polished surface finish. It offers a maximum torque of 350 Nm and supports dynamic balancing. The controller weighs 2.3 kg and operates within a temperature range of -40 degrees C to +120 degrees C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
B&R Automation makes the 8BVI0220HWSS.000-1 power supply module, which is made for precise control and efficiency in industrial automation systems. It has many built-in features that enable it to meet the most challenging drive needs. The module is designed to provide constant electrical performance in a range of configurations and installation conditions.
The 8BVI0220HWSS.000-1 power supply module can produce 16.2 kW of power continuously and can handle 22 Aeff of current continuously through each motor link. On the DC bus, the machine works with a voltage of 750 VDC and a capacitance of 495 uF. There are three frequency switching options: 5 kHz, 10 kHz, and 20 kHz. The top frequency that can be sent out is 598 Hz. The encoder interface is based on the EnDat 2.2 standard, and the longest cable length that can be used is 100 m. On the rising edge, the trigger input change delay is about 52 us, and on the falling edge, it is about 53 us. The input voltage range for 24 VDC is 25 VDC ~1.6%, and the output voltage is kept at 24 VDC ~6% when the input voltage is above 315 VDC.
The 8BVI0220HWSS.000-1 supply module can be installed at any height between 0 and 500 meters. The IP20 classification of the module is determined by EN 60529 and denotes its level of security. The module is about 5.2 kg heavy, which makes it harder to integrate into systems where small design and load planning are important. The module can handle a high current of 55 Aeff at most. The length of a motor line can be up to 25 m at any sampling rate. For this reason, the 24 V output is equipped with a 250 mA slow-blow, auto-reset switch.
Frequently Asked Questions about 8BVI0220HWSS.000-1:
Q: Does 8BVI0220HWSS.000-1 support multiple switching frequencies?
A: Yes, it supports 5, 10, and 20 kHz. This enables adaptable thermal and acoustic behavior depending on the application.
Q: Why does 8BVI0220HWSS.000-1 have EnDat 2.2?
A: EnDat 2.2 provides high-resolution encoder feedback. It improves synchronization between the motor and control logic.
Q: How does 8BVI0220HWSS.000-1 reduce standby losses?
A: It operates with nominal standby losses of 11.3 W. This helps reduce overall energy waste during idle states.
Q: Do 8BVI0220HWSS.000-1 trigger inputs respond quickly?
A: Yes, the trigger input delay is ~52 us rising and ~53 us falling. Fast input response supports tight control timings.
Q: Why does 8BVI0220HWSS.000-1 include a 250 mA fuse?
A: The 24 VDC output is protected by a 250 mA slow-blow, auto-reset fuse. It prevents overload without manual intervention.
