8BVI0110HCSS.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
16 Seconds
The 8BVI0110HCSS.000-1 is a servo controller manufactured by B & R Automation as part of the 8BVI Servo Controllers series. It has a continuous motor power of 11 kW, a continuous motor current of 15.1 Aeff, and a peak current of 37.7 Aeff. The controller features a DC bus voltage of 750 VDC, a maximum output frequency of 598 Hz, and an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8BVI0110HCSS.000-1 servo controller is produced by B&R Automation as part of the 8BVI Servo Controllers series. Installed in control cabinets, it conditions a shared DC link and supplies regulated phase current, brake energy management, and encoder power for automated motion axes. This arrangement helps assembly and handling systems receive stable drive signals during continuous operation.
During continuous duty, it delivers a phase current of 15.1 Aeff, enabling connected motors to sustain a shaft output of 11 kW without thermal derating. For brief acceleration demands, reserve capacity rises to 37.7 Aeff, which supports rapid indexing cycles and short load spikes. The power stage switches at a nominal 5 kHz, balancing current control with manageable inverter losses. It can also generate stator frequencies up to 598 Hz for high-speed synchronous motor operation.
The internal DC link is held at 750 VDC and buffered by 330 µF of bus capacitance to stabilize the supply during dynamic load changes. Standby losses remain low at 8.3 W, while the brake channel provides continuous current for controlled energy dissipation. Control electronics accept 25 VDC ± 1.6 percent, the encoder supply delivers 350 mA, and the housing width is 53 mm. An IP20 enclosure rating suits the unit for protected electrical cabinets.
Wake Industrial can arrange same-day shipping for time-critical orders. Each purchase is covered by a 1-year warranty. Quotations issued for this part remain valid for 30 days. The chat tool available on the website can answer general questions about type codes or fault codes.
Frequently Asked Questions about 8BVI0110HCSS.000-1:
Q: What is the continuous motor current provided by the 8BVI0110HCSS.000-1 servo controller?
A: The continuous motor current for the 8BVI0110HCSS.000-1 is rated at 15.1 Aeff.
Q: What is the maximum output frequency supported by the 8BVI0110HCSS.000-1?
A: This controller supports a maximum output frequency of 598 Hz for servo motor operation.
Q: What is the DC bus voltage rating for the 8BVI0110HCSS.000-1 controller?
A: The DC bus voltage for the 8BVI0110HCSS.000-1 servo controller is 750 VDC.
Q: What protection rating does the 8BVI0110HCSS.000-1 controller feature?
A: It offers a protection rating of IP20, indicating limited protection against solid objects.
Q: What is the continuous motor power output of the 8BVI0110HCSS.000-1?
A: This model delivers a continuous motor power output of 11 kW.
