8BVI0110HCS0.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8BVI0110HCS0.000-1 is part of the 8BVI Servo Controllers series and delivers a continuous power of 11 kW with a continuous current of 15.1 Amps. The controller features a peak current of 37.7 Amps, a nominal switching frequency of 5 kHz, and supports a maximum output frequency of 598 Hz. It has dimensions of 317 mm in height, 53 mm in width, and 212 mm in depth for cold plate configurations.
Internal Product Review
The 8BVI0110HCS0.000-1 is a B & R Automation servo controller with 11 kW continuous power and 15.1 Aeff continuous current. Strong dynamic response comes from 37.7 Aeff peak current and a 598 Hz max output frequency, making the controller a very capable choice for demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8BVI0110HCS0.000-1 is a servo controller produced by B & R Automation for the 8BVI Servo Controllers series. It provides closed-loop power conversion between the plant’s AC mains and a synchronous or induction servo motor, executing speed and torque commands from the machine control layer. Within an automation cell, this device regulates motor currents, supervises thermal limits, and coordinates dynamic braking so that axes can accelerate and decelerate in line with cycle-time requirements. This arrangement allows one controller to manage both steady running and rapid load changes on a servo axis.
The power section can deliver a continuous armature current of 15.1 Aeff and a sustained mechanical output of 11 kW. Short-duration overloads are handled by a peak current capability of 37.7 Aeff, allowing the drive to clear inertia at startup. When ambient altitude exceeds 500 m, permissible current is reduced by 1.51 Aeff per 1000 m to limit semiconductor heating. The controller’s silicon is rated for environments up to 55 °C, and its internal gate pattern supports a nominal switching frequency of 5 kHz while producing motor output frequencies up to 598 Hz for high-speed spindles. For cable routing, the permitted motor line length at a 20 kHz carrier is 10 m, and a cold-plate discharge capacitance of 0.14 µF diverts transient energy during switching events.
The integrated brake chopper sources 2.1 A through a 0.3 Ω resistor and issues hold commands at 0.5 Hz. Its output to the motor brake is 24 VDC +5.8%/-0%, ensuring positive release under rated load. The housing measures 53 mm wide, 212 mm deep to the cold plate, and 317 mm high, enabling dense cabinet layouts. Its narrow profile leaves room for adjacent modules on crowded back panels. Total continuous power dissipation is removed through a plated heat sink, and width allowances must be maintained so airflow can keep the heat sink within its allowable operating temperature.
