8BVI0110HCD0.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8BVI0110HCD0.000-1 servo controller is part of the 8BVI Servo Controllers series and supports two motor connections, each with continuous current up to 15.1 Amps and peak current of 37.7 Amps. It is rated for 22.3 kW continuous power consumption with a DC bus voltage of 750 VDC, and weighs 4.1 kg with IP20 degree of protection.
Internal Product Review
The 8BVI0110HCD0.000-1 is a B & R Automation servo controller designed for precise dual-axis drive service, with 2 motor connections and IP20 protection. Continuous output is impressive at 11 kW per motor, and 15.1 Aeff continuous current per motor supports stable operation under sustained load. A 750 VDC DC bus and 598 Hz maximum output frequency make the 8BVI0110HCD0.000-1 a strong choice for high-response motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8BVI0110HCD0.000-1 is a dual-channel drive module built by B&R Automation and supplied within the 8BVI Servo Controllers series. The device interfaces directly with the DC bus of a modular cabinet system and supplies regulated three-phase power to two motor outputs. In industrial automation, such a module is installed to execute closed-loop current and velocity control, coordinate braking circuits, and monitor protective limits for connected servomotors. This arrangement suits machine sections where synchronized axes share a common supply structure and require compact cabinet integration.
This module couples to a shared DC link that is stabilized at 750 VDC by internal filtering. A bus capacitance of 660 µF smooths transient load changes and supports energy recovery during regenerative braking. Each motor output can deliver a continuous phase current of 15.1 Aeff, modulated through an insulated-gate bridge that switches at a nominal frequency of 5 kHz. The synthesized waveform permits fundamental output frequencies up to 598 Hz, which supports high-speed spindle or linear motor operation. For short acceleration intervals, the current reserve rises to 37.7 Aeff, giving added torque during brief dynamic demand without pushing the power stage into sustained overload.
The controller draws its logic power from a 25 VDC supply with a tolerance of ±1.6%, while a dedicated brake channel provides 24 VDC with +5.8% tolerance and can sink 2.1 A through loads as low as 0.3 Ω. Total continuous power reaches 22.3 kW across both axes, with up to 11 kW available per motor when the cabinet DC bus is at nominal voltage. The housing carries an IP20 rating, weighs 4.1 kg, and occupies 106.5 mm of panel width, which helps support dense side-by-side installation in multi-axis cabinets. Integrated brake resistor supervision and fault monitoring respond to abnormal operating conditions so the module can maintain controlled axis behavior during repetitive production cycles.
