8BVI0014HWSS.000-1 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 8BVI0014HWSS.000-1 is part of the 8BVI Servo Controllers series and features a continuous motor power of 1.4 kW with a continuous motor current of 1.9 A. It offers a peak current of 4.7 Aeff and operates at a maximum output frequency of 598 Hz. The controller is protected to IP20 and supports a DC bus voltage of 750 VDC.
Internal Product Review
The 8BVI0014HWSS.000-1 is a B & R Automation servo controller with 1.4 kW continuous motor power and 1.9 Aeff continuous motor current. IP20 protection and a 55°C maximum operating temperature support dependable cabinet integration in demanding motion applications. A 598 Hz maximum output frequency stands out as a strong performance feature.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 8BVI0014HWSS.000-1 servo controller is produced by B&R Automation and belongs to the 8BVI Servo Controllers series. Designed for panel-mounted drive systems, the unit conditions DC power and modulates three-phase outputs for synchronous and induction motors used in pick-and-place gantries, packaging lines, and other automated equipment. Motor brake management and high-frequency switching stages are integrated into the compact housing, reducing the number of separate components required within the control cabinet. The controller regulates motor torque and speed in response to commands from the machine control system.
The control electronics operate from a regulated 25 VDC input, while the main drive section uses a DC link rated at 750 VDC. The link includes 165 µF of bus capacitance to support brief load transients and help stabilize its voltage. The controller can deliver a continuous motor output of 1.4 kW when the motor current remains at 1.9 A rms. Temporary acceleration demands are supported by a peak output current of 4.7 A rms. The IGBT bridge operates at a nominal switching frequency of 5 kHz, balancing switching losses with output waveform control. An internal brake control circuit supplies 24 VDC at up to 1.1 A to the motor holding brake through a 0.5 Ω path. This circuit allows the holding brake to secure the motor shaft when operating power is removed.
The controller supports an output frequency of up to 598 Hz, making it suitable for motors that operate above standard line frequencies. Its IP20 protection rating guards against contact with hazardous internal parts and the entry of larger solid objects, but the unit must be installed inside an appropriate enclosure. Reliable operation is permitted at ambient temperatures up to 55 °C; continuous output current must be reduced when operating conditions exceed the applicable thermal limits. The housing is 53 mm wide, allowing multiple drive axes to be arranged side by side while conserving cabinet space. Appropriate airflow and installation clearances are still required to remove heat from the controller and nearby equipment during sustained operation.
