80VD100PD.C088-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 80VD100PD.C088-01 is an inverter module from the 80VD Inverter Modules series by B & R Automation. It features a 12-bit ADC resolution, a 20 kHz controller frequency, and IP20 degree of protection. The module supports up to 2 motor connections with a maximum current per motor of 10.6 ARMS or 15 A peak, and includes two SinCos encoder inputs with a 5 V supply voltage.
Internal Product Review
The 80VD100PD.C088-01 is a B & R Automation inverter module with IP20 protection and a 24 VDC ±25% CPU supply. Dual motor connections and 8 ARMS nominal current make the unit well suited for steady multi-axis drive service. A 20 kHz controller frequency is a strong performance advantage for precise inverter control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 80VD100PD.C088-01 inverter module is built by B&R Automation for the 80VD Inverter Modules series. It is a compact drive stage that converts a shared DC link into controlled three-phase power for two synchronous or induction motors, integrating current measurement, position feedback evaluation, and pulse-width modulation in one housing. By combining these functions, the unit supplies torque, speed, and position control to machinery such as pick-and-place gantries, packaging stations, and small conveyor axes within automated lines. It mounts on a DIN rail inside a central cabinet and communicates with the main PLC over the X2X real-time bus, allowing scalable multi-axis arrays without separate drive controllers.
Internally, the module’s digital signal processor samples phase currents with a 12-bit converter, and closed-loop algorithms execute at 20 kHz to minimize control latency. Control electronics are powered from a 24 VDC ±25% service rail, while the power section is stabilized by 940 µF of DC-bus capacitance that absorbs regeneration peaks. Two SinCos encoder inputs are provided, and each channel receives 5 V ±5% excitation so that absolute position can be resolved at high resolution. The gate drive produces a nominal switching frequency of 5 kHz. The thermal design allows each motor channel to supply up to 10.6 A RMS / 15 A peak for short intervals without exceeding junction temperature limits. Motor leads may extend up to 25 m, and both outputs are available through dedicated screw terminals.
The drive body carries an IP20 protection rating, so it requires installation inside a closed panel but needs no additional finger guards. During startup, an active precharge circuit limits the maximum surge current to 10 A, protecting upstream fuses. Continuous operation is rated at 8 A RMS, and dynamic monitoring disconnects the stage if the DC link rises above 95 VDC. Shutdown also occurs when the voltage drops below 18 VDC to avoid uncontrolled conduction. An isolation barrier separates the logic and power sections to maintain signal integrity. Embedded temperature sensors allow controlled derating before thermal thresholds are reached, supporting dense multi-axis assemblies in shared cabinets.
