80PS080X3.10-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
54 Seconds
The B & R Automation 80PS080X3.10-01 is a power supply module from the 80PS Power Supply Modules series with a maximum output power of 1000 W and a 24 Vdc output current of 2 A. This module features an IP20 protection rating, weighs 3.75 kg, and provides 20 percent overload current for up to 2 seconds. It uses a 10-pin terminal block interface and has a control accuracy of plus or minus 2 percent.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 80PS080X3.10-01 from B & R Automation belongs to the 80PS Power Supply Modules series. Designed for cabinet installation, the module converts a 400 V three-phase network into regulated DC energy for the company’s X20 controller family and associated drive axes. By providing both bus power and a 24 V control rail, it functions as the central energy interface that keeps PLC backplanes, I/O slices, and motion inverters energized during normal and transient operating conditions within an industrial automation line.
In normal operation the module draws 3x 2.2 A from the 400 V mains and can deliver up to 1000 W of continuous DC-bus power to downstream inverters. A separate 24 V rail supplies 2 A for sensors and logic circuits, and bus power consumption of 0.8 W indicates the unit’s own internal demand. Output voltage is held within a control accuracy of ±2%, so connected electronics receive predictable supply levels. Short load surges are handled by permitting an extra 20 % of current for 2 s, after which the feedback circuits return the supply to its nominal point. Each phase is protected by a 5 A internal fuse, and the housing carries an IP20 rating for finger-safe operation when mounted inside a closed panel.
Mechanical dimensions favor dense enclosures: width is 67.5 mm, depth 219 mm, and height 257 mm, with the aluminum body weighing 3.75 kg. Connections are made through a 10-pin terminal block variant that groups mains, DC-bus, and 24 V outputs for quick replacement. A built-in energy store keeps the DC rail alive for 10 ms after mains loss, allowing controllers to save state before shutdown. On the fieldbus side, the X2x interface refreshes status every 250 µs, so supply diagnostics can be integrated into real-time control loops. These installation, communication, and ride-through characteristics complement the overload features outlined above to support predictable machine behavior under variable demand.
Frequently Asked Questions about 80PS080X3.10-01:
Q: What is the 24 Vdc output current of the 80PS080X3.10-01 power supply?
A: The 80PS080X3.10-01 module provides a 24 Vdc output current of 2 A.
Q: What is the maximum output power of the 80PS080X3.10-01?
A: This power supply can deliver a maximum output power of 1000 W.
Q: What type of connector interface does the 80PS080X3.10-01 use?
A: The model features an interface variant with a 10-pin terminal block for easy connections.
Q: What is the control accuracy of the 80PS080X3.10-01 power supply?
A: It offers a control accuracy of ±2%, ensuring consistent voltage regulation.
Q: What is the internal fuse rating for each phase in the 80PS080X3.10-01?
A: The module has an internal fuse rated at 5 A per phase, providing built-in circuit protection.
