80MPH6.300S000-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 80MPH6.300S000-01 is a stepper motor from the 80M Stepper Motors series, featuring an 86 mm NEMA 34 flange and a three-stack configuration. This motor has no encoder or brake and provides a base current of 30 units with standard protection.
Internal Product Review
The 80MPH6.300S000-01 is a B & R Automation 80MP stepper motor in a standard NEMA 34 frame. The no-brake and no-encoder configuration supports straightforward integration in simple motion systems and helps reduce setup complexity. The 3-stack construction gives this motor a solid industrial presence and makes the unit a strong choice for dependable stepper motor service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 80MPH6.300S000-01 is an 80MP stepper motor produced by B&R Automation within the 80M Stepper Motors series. It supplies indexed rotary motion for positioning tables, feeders, and other automation axes where open-loop accuracy is sufficient. Pulse commands from a microstep drive are converted into discrete angular increments, enabling repeatable displacement without closed-loop feedback. The frame follows the NEMA 34 class, allowing the motor to fit standardized mounts used in packaging, textile, and semiconductor equipment. Its step-based operation supports applications that require controlled incremental movement without the added complexity of a separate position feedback loop.
Electrical scaling uses a base current value of 30 and a multiplication factor of x1 (10^0), establishing the rated phase current that the drive must supply during continuous operation. Internally, the laminated stator is assembled according to motor stack code 6, and the motor has a three-stack configuration. The additional stator sections increase detent torque and holding force while maintaining the proportions required for the intended mounting class. The flange size has an H designation, matching the 80 mm active body diameter used across the 80M family. The drive and coupling should be selected to accommodate the resulting electrical load and mechanical forces during acceleration, deceleration, and standstill operation.
The motor is supplied with no brake, eliminating residual brake drag that could interfere with stable microstepping. The housing provides standard protection for use in clean indoor control environments. The motor also has no encoder, allowing it to operate through an open-loop control scheme in which commanded steps determine the expected shaft position. Mechanical attachment uses an 86 mm NEMA 34 flange, which supports installation on compatible square mounting patterns without an additional flange adapter. Design revision 01 indicates compatibility with the corresponding mounting hardware and pinout used for this version of the 80M Stepper Motors series. Cabling, clamps, and drive settings can therefore be selected according to the motor’s existing electrical and mechanical interfaces.
