80MPF1.250D114-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The 80MPF1.250D114-01 is a stepper motor manufactured by B & R Automation as part of the 80M Stepper Motors series. It features a 60 mm flange, ABR incremental encoder, and a built-in brake. The motor has an IP65 protection level and a single stack configuration.
Internal Product Review
The 80MPF1.250D114-01 is a B & R Automation 80MP stepper motor that feels well suited for precise machine-axis duty. The ABR incremental encoder supports consistent feedback, and the IP65 protection level adds confidence in enclosed or washdown-adjacent installations. A built-in brake rounds out a very capable package for controlled positioning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 80MPF1.250D114-01 belongs to the 80M Stepper Motors series produced by B & R Automation. As a hybrid stepper unit, it converts pulse-train commands from a controller into accurate angular movement, allowing precise positioning of indexing tables, small conveyors, or dosing pumps. Integrating this motor into an automation cell simplifies motion stages because the winding geometry provides high torque at low speeds. Unified cabling and mounting options also support consistent installation across the series.
The motor is supplied with a brake, so the shaft stays locked whenever power is removed, preventing suspended or vertical loads from drifting. Rotor position is monitored through an ABR incremental encoder; the drive receives quadrature signals for step verification and stall detection. A square flange dimension of 60 mm matches NEMA 24 hardware, and the flange size designation F indicates hole spacing suited to standardized gearheads or bearing blocks. The housing is rated IP65, meaning it resists dust ingress and low-pressure water jets. This protection allows the motor to operate outside electrical cabinets when the surrounding installation provides suitable cable and connector sealing.
Drive tuning uses a current multiplier factor of x1 (10^0), so the windings accept the rated amperage directly without scaling. This direct relationship simplifies parameter entry and reduces the risk of applying an incorrect current value during setup. The motor uses design revision 01, which includes minor mechanical updates while preserving its established mounting dimensions. Its one-stack configuration limits axial length and rotational inertia, supporting faster acceleration in compact pick-and-place axes. The device is classified as an 80MP Stepper Motor. Its control profile supports fixed step angles and pulse-based motion tables for repeatable positioning tasks.
