80MPD3.300S014-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 80MPD3.300S014-01 is part of the 80M Stepper Motors series. It features a 56 mm NEMA 23 flange and an ABR incremental encoder. The motor uses a 2-stack configuration and comes with no brake option, with a standard protection level.
Internal Product Review
The 80MPD3.300S014-01 is a B & R Automation 80MP stepper motor with an ABR incremental encoder. The no-brake design and standard protection level support clean integration in controlled motion assemblies. A compact NEMA 23 form factor makes the motor a strong choice for precise stepper applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 80MPD3.300S014-01 is a stepper motor manufactured by B & R Automation within the 80M Stepper Motors series. It converts discrete current sequences from a drive into precise angular steps. This controlled movement makes it suitable for indexing conveyors, label applicators, and similar positioning axes in automated machinery where moderate torque and repeatable motion are required. Its step-based operation supports applications that require consistent incremental movement without the continuous rotation associated with conventional motors.
B & R supplies this model with no built-in holding brake, so load holding must be handled mechanically or through drive torque when power is removed. Phase current is referenced to a base value of 30 and a multiplier of 1 × 100, allowing the controller to scale RMS current directly from the type code. Feedback is provided by an ABR incremental encoder, which sends differential pulse streams to verify step completion and support accurate homing. The motor bolts to machinery through a 56 mm (NEMA 23) square flange, providing a standardized mounting interface for compatible equipment. Its housing has the standard protection level, so the motor is intended for clean or lightly shielded enclosures that do not require additional sealing hardware.
The motor uses a 3-layer lamination pack and a two-stack mechanical assembly, which provide higher detent torque than a single-stack arrangement while maintaining moderate inertia for rapid step response. Its classification as an 80MP stepper motor associates its electrical angle and winding arrangement with the broader 80M platform. The flange outline has size designation D, supporting consistent mounting across compatible 80M housings. The product is built to design revision 01, which identifies the applicable motor design. The internal stack arrangement balances torque production with responsive acceleration, making the motor suitable for repetitive positioning cycles in automated equipment.
