80MPD1.300S000-01 B & R Automation
Wake Industrial LLC is not an authorized distributor of this product.
The B & R Automation 80MPD1.300S000-01 is a stepper motor from the 80M Stepper Motors series with a 56 mm NEMA 23 flange and a stack configuration of 1 stack. This model is designed without a brake or encoder and has standard protection level with a current base value of 30.
Internal Product Review
The 80MPD1.300S000-01 is an 80MP stepper motor in a compact NEMA 23 frame. A single-stack configuration and no-brake design make the unit well suited for straightforward indexing and motion control duties. Standard protection completes a clean, dependable motor package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 80MPD1.300S000-01 is a stepper motor produced by B&R Automation for the 80M Stepper Motors series. It converts pulse sequences from a compatible drive into fixed angular movements, allowing machinery to index tooling, advance packaging film, and position small handling mechanisms with consistent repeatability. Each command pulse advances the rotor by a discrete increment, providing predictable motion without the continuous position regulation used by servo systems. This operating method is suitable for synchronized production tasks in which commanded movement remains within the available torque range. The compact motor can be integrated into automated equipment that requires controlled incremental movement and straightforward drive operation.
A current base value of 30 establishes the nominal phase-current setting used by the companion drive. The x1 (10^0) multiplier indicates that the base value is applied without an additional scaling exponent. The motor fastens through a 56 mm square face that corresponds to the NEMA 23 mounting pattern. Its flange designation D identifies this mounting arrangement within the series and helps match the motor face to compatible machine plates or couplings. The rotor uses one magnetic stack, which supports a compact housing length for installations with limited axial space. These dimensions and electrical settings should be checked against the selected drive, coupling, and available mounting area before installation.
The motor is supplied with no shaft brake, so an external holding device may be necessary if the connected load must remain fixed after power is removed. It also has no integrated encoder, which reduces feedback wiring and requires the controller to estimate position from commanded steps. The standard sealing level is intended for clean, dry installation areas where the motor is protected from excessive dust, moisture, and direct fluid exposure. Adequate enclosure protection should therefore be provided when the surrounding process creates airborne contamination or liquid spray. Design revision 01 indicates the first revision of this motor configuration. The 80MP designation distinguishes its product grouping within the broader 80M motor range without changing the mounting, feedback, brake, or sealing characteristics stated above.
